606708
48
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-3
RECEIVING APRS DATA
Each time a new APRS packet is received, the frequency display
is interrupted to show information as below:
Status text
The received APRS packet may include information on an object
such as a hurricane or tornado. In this case, the name of the object
appears instead of a callsign.
Press [MSG] to send a message to the station.
Press [DETAIL] to access further information.
To restore the frequency display, press [ESC] or just wait for
approximately 10 seconds.
Note:
When you receive an APRS packet including an “EMERGENCY” comment,
a different format of display from the above will appear and a different beep
will sound.
When you receive an APRS position packet that you transmitted, the
frequency display is interrupted and “MY POSITION” will appear on the
display. This could happen when one or more digipeaters are used. (When
setting Menu No. 625 (DISPLAY AREA) to “ENTIRE”, “HALF”, or “OFF”, the
call sign of the digipeater station will not display.)
If you receive a message that you transmitted, “MY MESSAGE” will appear.
You can change the interrupt screen display setting through Menu
No. 625 (DISPLAY AREA). When set to “OFF”, the frequency display
is not interrupted. An indicator such as “dP” appears, depending on
the type of data. Refer to the table for details.
Indicator Meaning
dP Duplicate position comment
nP New position data
oP
Other station position
data (Navitra beacon)
>P Beyond position limit
>F Beyond fi lter type
aM ACK message
dM Duplicate message data
nM New message data
oM To other stations message data
rM Rejected Message
dS Duplicate status text
nS New status
Q?
1
Query
?? Packet that cannot be decoded
dD Duplicated DX cluster data
nD New DX cluster data
1
The transceiver automatically transmits the appropriate information in
approximately 2 minutes after receiving a request.
Note:
The APRS programs for PCs have entry fi elds for a position comment and
status text. The data entered to these two fi elds are transmitted as separate
packets. This transceiver, however, includes both of a position comment and
status text in one packet to transmit.
This transceiver beeps each time it receives any type of APRS packet. You
may access Menu 624 (AUDIO - RX BEEP) to change this setting. The
default is “ALL”.
ACCESSING RECEIVED APRS DATA
This transceiver is capable of receiving and storing APRS data
received from up to 100 stations in memory. You can easily recall
the information of the desired station.
1 Press [KEY], [LIST].
The list of stations appears.
The numbers beside the callsigns indicate the order in which data is
received. The data received last is assigned 1.
[TOP]: Displays the list of the fast 5 stations.
[5
]: Displays the list of the previous 5 stations.
[5
]: Displays the list of the next 5 stations.
[ESC]: Restores the frequency display.
[MSG]: Allows message entry to the current station.
[SORT]: To select the sort function.
[FILTER]: To select the fi lter function.
[TUNE]: Set the QSY frequency (APRS only).
[CLR]: Deletes the current station.
• Press [F].
[POS.RQ]: Request position.
[ALLCLR]: Deletes all stations.
When you press [ALLCLR], “CLEAR ALL?” appears with the
message. Press the Tuning Control to clear all.
2 Rotate the Tuning control to select the desired station using
the cursor (
).
3 Press the Tuning control.
The information of the selected station appears.
[BACK]: Restores the list of stations.
[MSG]: Allows message entry to the current station.
[]: Displays the previous page.
[]: Displays the next page.
[TUNE]: Set the QSY frequency (APRS only).
[CLR]: Deletes the entire information of the current
station.
Note:
When data from the 101st station is received, the oldest data in memory is
replaced by that data.
Each time a new APRS packet is received from the same station, the old
data from that station (in memory) is replaced by new data.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GE in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GE

Kenwood TM-D710GE User Manual - English - 55 pages

Kenwood TM-D710GE User Manual - German - 74 pages

Kenwood TM-D710GE User Manual - Dutch - 75 pages

Kenwood TM-D710GE User Manual - Dutch - 55 pages

Kenwood TM-D710GE User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info