606708
47
Zoom out
Zoom in
Previous page
1/77
Next page
ADJUSTING THE INTERNAL CLOCK
When the internal GPS function is turned ON, the year, month,
day, and time are automatically set from the GPS satellite
information. If the GPS information cannot be received, you can
manually enter the date and time.
Note: The battery for the clock backup is built into the unit. When the power
source is connected, the battery begins to charge. It takes approximately 12
hours to become fully charged.
Setting Date
1 Enter Menu mode and access Menu 925.
The fi rst 2 digits blink.
2 Rotate the Tuning control to enter the current month (TM-
D710GA) or day, then press the Tuning control.
The next 2 digits blink.
3 Rotate the Tuning control to enter the current day (TM-
D710GA) or month, then press the Tuning control.
The last 2 digits blink.
4 Rotate the Tuning control to enter the current year, then
press the Tuning control.
5 Press [ESC] to exit Menu mode.
Note:
When used at room temperature (25°C), the error of the internal clock in a
month is within one minute.
The internal clock is effective until December 31, 2099.
Setting Time
1 Enter Menu mode and access Menu 926.
The fi rst 2 digits blink.
2 Rotate the Tuning control to enter the current hour, then
press the Tuning control.
To set 1 o'clock PM for example, select 13.
The next 2 digits blink.
3 Rotate the Tuning control to enter the current minute,
then press the Tuning control.
4 Press [ESC] to exit Menu mode.
Setting UTC Offset
1 Enter Menu mode and access Menu 927.
2 Rotate the Tuning control to select the appropriate UTC
offset, then press the Tuning control.
The selectable range is from +14:00 to –14:00 in steps of 15
minutes.
3 Press [ESC] to exit Menu mode.
APRS-2
CONNECTING WITH A EXTERNAL GPS RECEIVER OR
WEATHER STATION
The GPS jack on this transceiver accepts a 2.5 mm (1/10")
3-conductor plug. If necessary, use the supplied cable to modify
the cable end of external GPS receiver or Weather Station.
Use an external GPS receiver which conforms to the NMEA-0183
format and is compatible with RS-232C signal polarity output at the
below mentioned levels.
[Low level: –15.0V ~ +0.5 V / High level: +3.0V ~ +15.0V]
You cannot use GPS receivers with USB-type connections.
Set Menu No. 602 (GPS PORT-INPUT) to “GPS” (
external GPS
receiver), “WEATHER (Davis)” (Weather Station), or “WEATHER
(PeetBros.)” (Weather Station), depending on the equipment
connected to the GPS terminal.
When an
external GPS receiver is selected, the “GPS” indicator
appears. When a Weather Station is selected, the “WXI” indicator
appears.
External GPS receiver
To GPS jack
Shield
(to GND on GPS/ WX)
Red
(to DATA OUT on GPS/ WX)
White
(to DATA IN on GPS/ WX)
Weather Station
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GE in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GE

Kenwood TM-D710GE User Manual - English - 55 pages

Kenwood TM-D710GE User Manual - German - 74 pages

Kenwood TM-D710GE User Manual - Dutch - 75 pages

Kenwood TM-D710GE User Manual - Dutch - 55 pages

Kenwood TM-D710GE User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info