If you also have a compatible KENWOOD handy transceiver, you may use it as a remote control for this mobile transceiver. You will
control one band on the mobile while sending DTMF tones to the other band from the handheld. This function is useful, for example,
when you want to control the mobile from a location outside your vehicle.
Note:
◆As a remote control, you can also use a handy transceiver which does not have a remote control function but a DTMF function. However, you must manually send
DTMF tones for control code strings. Skip steps 1 and 3 in “PREPARATION”.
◆The FCC rules permit you to send control codes only on the 440 MHz band.
PREPARATION
Let us assume band A (VHF) of the mobile transceiver will be
controlled.
On the handy transceiver:
1Program a 3-digit secret number.
• For the programming method, see the instruction manual for the
handheld.
2Select the transmit frequency on the UHF band.
3Make the handheld enter Remote Control mode.
• For the method, see the instruction manual for the handheld. If
not described, consult your dealer.
On the mobile transceiver:
4Enter Menu mode and access Menu 923.
5Set the ID code to the same secret number you set on the
handy transceiver.
6Select the receive frequency on band B (UHF).
• Match this frequency with the transmit frequency on the
handheld.
7Select band A (VHF) as the TX band or Control band.
8To cause the mobile to send a control acknowledgment to the
handheld, enter Menu 924 and set it to ON.
• DTMF tones which represent the secret number will be used as
an acknowledgment.
9Turn the transceiver power OFF.
10 Press [REV] + Power ON to enter Remote Control mode.
• The (blink) and icons appear on the display.
• To exit Remote Control operation, turn the transceiver power
OFF, then press [REV] + Power ON again.
CONTROL OPERATION
While in Remote Control mode, the DTMF keys of the handheld
will function as shown in the table below. Each time you press
the desired key, the handheld will automatically enter transmit
mode and send the corresponding command to the mobile.
Note: If using a handheld without a remote control function, manually send
“AXXX#YA#” where “XXX” is a 3-digit secret number and “Y” is a single-digit
control command. If you do not add ”A#” to the end, you can skip sending
“AXXX#” next time; however, the mobile may be accidentally controlled by other
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Kenwood TM-D710GA at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.
The manual is 7,22 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
