606707
63
Zoom out
Zoom in
Previous page
1/77
Next page
APRS-18
STORING AUTO MESSAGE REPLY
Enter Menu mode and access Menu 622.
Auto Answer Reply <REPLY>
While you are driving, for example, you cannot immediately
answer to received messages. On this transceiver, you can
program the message to be automatically returned when a
message is received.
You can choose from the following delay times: [ON
(DELAY TIME NONE)], [ON (DELAY TIME 10 sec)], [ON
(DELAY TIME 30 sec)]. As an example, when selecting [ON
(DELAY TIME 10 sec)], your auto response message will be
transmitted approximately 10 seconds after having received a
message.
The auto response message will be cancelled if you
operate the transceiver before the delay time expires,
after having received a message.
“AA:” (Auto Answer) is automatically added to the top of
the auto response message.
1 Rotate the Tuning control to select “ON (DELAY TIME
NONE)”, “ON (DELAY TIME 10 sec)”, or “ON (DELAY
TIME 30 sec)”, then press the Tuning control.
2 Rotate the Tuning control to select “TEXT”, then press
the Tuning control.
The display for entering a message appears; the fi rst digit blinks.
You can enter alphanumeric characters plus special ASCII
characters.
Reply To Callsign <REPLY TO>
When there is a message you would like to reply to for the
specifi c callsign, preset that callsign for automatic responses.
PROGRAMMING A MESSAGE GROUP CODE
Enter Menu mode and access Menu 623.
Use a message group code to exchange messages only among
your group members. With one or more message group codes
programmed, you will receive messages that include the same
group code(s), besides messages addressed to you. If you
program one or more bulletin group codes, you will not receive
bulletins addressed to other specifi c groups. You can program
any desired code using alphanumeric characters; up to 9
characters for messages, and up to 4 characters for bulletins.
You can also program up to 6 codes at the same time; each code
must be separated by a comma (,). If you program 3 message
group codes, for example, you will receive all messages that
include one of the 3 codes. If you program 3 bulletin group codes,
you will reject bulletins addressed to specifi c groups which do not
use any of the 3 codes.
You can enter 0 to 9, A to Z, , (comma), and –. For messages, ” is
also selectable.
The keypad on the microphone also is available to enter
alphanumeric characters.
In order to include a message group code in your outgoing packet,
enter a group code in place of a callsign. To include a bulletin group
code, enter it following BLN#; for example, “BLN#ABC” where ABC is
a group code. Use up to 9 characters for a message group code or
up to 4 characters for a bulletin group code.
Note: Unlike a message, a bulletin including a group code will be received by
stations who do not program any bulletin group code.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info