606707
28
Zoom out
Zoom in
Previous page
1/77
Next page
OTHER OPERATIONS
SELECTING AN OUTPUT POWER
It is a good idea to select lower transmit power if communications
is still reliable. This lowers the risk of interfering with others on
the band. When operating from battery power, you will enjoy
more operating time before a recharge is necessary.
Press [LOW] to select high (H), medium (M), or low (L) power.
You can program different power settings for bands A and B.
Note: When the transceiver overheats because of ambient high temperature
or continuous transmission, the protective circuit may function to lower transmit
output power.
MASKING A BAND
If you have no plans to use band A or B, you can hide the
frequency display on the unused band. This saves power
consumption and makes it simpler to read the information you
need.
1 Turn the transceiver power OFF.
2 Press the left or right [BAND SEL] + Power ON.
The band mask display appears.
3 Rotate the Tuning control to select the band you want to hide
(or return to normal).
4 Press the Tuning control to set the selected band.
5 Rotate the Tuning control to set the band to select USE or
MASK.
USE allows you to see and use the band as normal. MASK
hides the band on the display.
6 Press the Tuning control to set the selection.
7 Press the [ESC] to exit.
Note: You cannot operate the masked band nor use it to receive or transmit.
KEY BEEP
You can turn the transceiver beep function ON or OFF as
desired.
1 Enter Menu mode and access Menu 000.
2 Turn the beep function ON or OFF.
Even with the beep function turned OFF, the transceiver will emit
a beep tone under the following conditions:
1) When Auto Power Off is activated, the transceiver will beep 1
minute before the power turns off.
2) After transmitting for the maximum time duration according to
the Time-out Timer, the transceiver will beep.
Beep Volume
Each time you press a key, the beep tone will sound. If you
have left the beep function turned ON, you may wish to adjust
the volume level of the beep.
1 Enter Menu mode and access Menu 001.
2 Set the beep volume to a level from 1 to 7.
The default is level 5.
OTHER OP-1
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GA in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GA

Kenwood TM-D710GA User Manual - English - 55 pages

Kenwood TM-D710GA User Manual - German - 74 pages

Kenwood TM-D710GA User Manual - Dutch - 75 pages

Kenwood TM-D710GA User Manual - Dutch - 55 pages

Kenwood TM-D710GA User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info