696176
25
Zoom out
Zoom in
Previous page
1/129
Next page
8-2
Storing Simplex and Standard Repeater Frequencies
1 Select the frequency, mode, etc.
2 Press [F], [MR].
Memory channel registration screen appears on the
display.
3 Select the memory channel number.
4 Press [ENT].
The simplex channel is registered.
Storing Odd-Split Repeater Frequencies
WhenyouchangetheRXandTXfrequencies,registerthe
RXfrequencyrstandthenregistertheTXfrequency.Only
theTXfrequencycannotberegistered.
1 RegistertheRXfrequency.
A split channel can be registered only to an already
registered memory channel.
2 DisplaytheTXfrequency.
3 Press [F], [MR].
Memory channel registration screen appears on the
display.
4 Select the memory channel number.
5 Press [A/B].
The split channel is registered.
Note:
YoucannotsettheTXandRXfrequenciesondifferent
frequency bands.
Clearing a Memory Channel
Youcanclearthespeciedchanneloftheregisteredmemory
channels.
1 Press [MR] to enter the memory mode.
2 Press [ENT].
Thememorychannellistappears.Youcanalsoaccessto
the memory channel list by Menu No. 200.
3 Select the specified channel and press [MENU].
The memory channel list menu appears.
4 Select[ClearMemory]andpress[A/B].
A confirmation message appears on the display.
• Press[MODE] to return to the memory channel list
menu.
5 Press [A/B].
The specified memory channel is cleared.
To clear another memory channel, repeat the procedure
from step 3.
RECALLING A MEMORY CHANNEL
Youcanrecallamemorychannelintheorderofthechannel
number or select from a memory channel list.
Recalling in the order of memory channel number
1 Press [MR] to enter Memory Recall mode.
2 Press []/[ ] or rotate the [ENC] control to select your
desired Memory channel.
• Additionally,youcanenterachannelnumberusingthe
keypad.
Recalling from the memory channel list
1 Press [MR] to enter Memory Recall mode.
Memory channels in the current frequency band or all
memory channels will be recalled according to the setting
in menu No. 202.
2 Press [ENT].
The Memory channel list appears.
3 Press []/[ ] or rotate the [ENC] control or enter a
3-digitchannelnumberusingthekeypad.
The entered memory channel number will appear at the
topofthelist.Whenthememorychannelnumberistwo
digits or less, press [ENT] after the number.
4 Press [ENT].
The selected channel is configured and the screen returns
to the frequency display.
Note:
Whenasplitchannelisrecalled,“±”appearsonthedisplay.
Amemorychannelnumbercannotberecalledbykeypadinput
if the memory channel is registered as program scan memory.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D74E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D74E in the language / languages: English as an attachment in your email.

The manual is 6.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D74E

Kenwood TH-D74E User Manual - German, Dutch, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info