696176
23
Zoom out
Zoom in
Previous page
1/129
Next page
7-3
TRANSMITTING A 1750 Hz TONE
Most repeaters in Europe require that a transceiver transmit
a1750Hztone.OnaTH-D74E,simplypressing[CALL] will
transmitthistone.Itisalsopossibletoprogram[1750Hz]on
the front panel as a [CALL]keyfortransmittingthe1750Hz
tone.
1 Access Menu No. 142.
2 Setto[1750Hz].
Some repeaters in Europe must receive continuous signals
for a certain period of time, following a 1750 Hz tone. This
transceiver is also capable of remaining in the transmit mode
for 2 seconds after transmitting a 1750 Hz tone.
1 Access Menu No. 143.
2 Setto[On].
Note:
Whileremaininginthetransmitmode,thetransceiverdoesnot
continuously transmit a 1750 Hz tone.
Selecting an Offset Direction
The offset direction allows your transmit frequency to be
higher(+)orlower(–)thanthereceivefrequency.
1 Select your desired band (A or B).
2 Press [F], [REV] to select an offset direction.
• Eachtimeyoupress[F], [REV], the offset direction
changes as follows:
Simplex operation + Simplex operation
• IfyouareusingaTH-D74E,whenoperatingonthe430
MHz band, the offset direction changes as follows:
Simplex operation +=(–7.6MHz) Simplex
operation
Iftheoffsettransmitfrequencyfallsoutsidetheallowable
range, transmitting is inhibited. Use one of the following
methods to bring the transmit frequency within the band
limits:
• Movethereceivefrequencyfurtherinsidetheband.
• Changetheoffsetdirection.
Note:
Whileusinganodd-splitmemorychannelortransmitting,you
cannot change the offset direction.
REVERSE FUNCTION
After setting a separate receive and transmit frequency, you
can exchange these frequencies using the Reverse function.
Thisallowsyoutomanuallycheckthestrengthofsignalsyou
receivedirectlyfromotherstations,whileusingarepeater.If
thestation’ssignalisstrong,movetoasimplexfrequencyto
continue the contact and free up the repeater.
1 Press [REV]toturntheReversefunction[On]or[Off].
• WhentheReversefunctionisOn,the< >iconwill
appear on the display.
Note:
Ifthetransmitfrequencyisoutsidetheallowabletransmit
frequency range when using Reverse, pressing [PTT] will
cause an error tone to sound and transmission will be inhibited.
Ifthereceivefrequencyisoutsidethereceivefrequencyrange
when using Reverse, an error tone will sound and Reverse will
not operate.
TheARO(AutomaticRepeaterOffset)willnotfunctionwhen
ReverseisON.
YoucannotswitchReverseOnorOffwhiletransmitting.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D74E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D74E in the language / languages: English as an attachment in your email.

The manual is 6.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D74E

Kenwood TH-D74E User Manual - German, Dutch, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info