696175
86
Zoom out
Zoom in
Previous page
1/129
Next page
16-4
GATEWAY CALL
A gateway call can be made by setting the area repeater to
outputtheCQto[TO]andpressing[PTT].
AgatewayCQistheoutputofaCQtoanareathatis
different from that of your station through a repeater
connectedtotheInternet.Acallcanalsobemadetoanarea
signals cannot directly reach because of the connection to
theInternet.
Setting the Access Repeater (FROM)
Setanearbyrepeaterto[FROM].
Setting the Destination Repeater (TO)
1 Press [ ] (1s).
The destination selection screen appears. This screen also
appearswhenselecting[DestinationSelect]intheDigital
Function Menu.
2 Select[GatewayCQ]andpress[ENT].
The world region, country, and group select screen
appears.
3 Select your area group and press [ENT].
The repeater list selection screen appears.
4 Select the destination repeater.
Press [] to display detailed information of the repeater
thatyouselected.Whenyoupress[ENT], the repeater is
setto[TO].
Checking Whether Signals Reach the Repeater (TO)
1 Press [PTT] (1s) and transmit.
2 Checktheresponse.
If< > appears within 3 seconds, this indicates that
signals are reaching the destination repeater through the
Internetandsignalsarebeingoutputnormallyfromthe
destinationrepeater.However,< > does not appear if
there is an access from another station within 3 seconds.
Transmitting
Press [PTT] to transmit.
REPLY TO THE GATEWAY CALL
WhenyoureplytoaGatewayCQoraGatewayIndividual
call,youneedtosetthedestinationCallsignto[TO]before
pressing [PTT].
1 Press [ENT] (1s) after the transmission by the caller
station is finished.
2 SelecttheCallsignofthecallerstationbyCallHistory,and
press [ENT]tocapturetheCallsign.
TheCallsignissetto[TO],andtheroutesettingfor
GatewayCallisalsoautomaticallyset.
Note:
DuetotheD-STARstructure,youcannotmakeareplytothe
GatewayCallinthesettingby[LocalCQ].
TheCallsignoftheotherstationisstoredinCallHistorywhen
the transmission by the other station is finished. Press [ENT]
(1s) after the transmission by the other station is finished.
Instablecommunicationcondition,youcanalsomakea
reply by Direct Reply function without manually setting the
destinationCallsign.
CALLSIGN DESIGNATION
AcallbyCallsigndesignationcanbemadebysettingthe
Callsignoftheotherpartyto[TO]andpressingPTT.Acall
to the specific station is relayed automatically to the last
accessedrepeater,soacallcanbemadewithoutknowing
the area in which the other station is currently located.
Setting the Access Repeater (FROM)
Setanearbyrepeaterto[FROM].
Setting the Destination (TO)
1 Press [ ] (1s).
The destination selection screen appears. This screen also
appearswhenselecting[DestinationSelect]intheDigital
Function Menu.
2 Select[Individual]andpress [ENT].
TheCallsignlistappears.
3 SelecttheCallsignandpress[ENT].
TheindividualCallsignandnamearesetto[TO].
4 Press [PTT] to transmit.
CALLSIGN LIST
Upto300Callsignsoftheotherstationscanberegistered.
Names and any memo can also be registered instead of
Callsigns.TheregisterednamesaredisplayedintheTX
HistoryandRXHistory.
Editing the Callsign
YoucanedittheinformationoftheCallsign.
1 Access Menu No. 220.
TheCallsignlistselectionscreenappears.
2 Press [A/B].
TheCallsignlisteditingscreenappears.
3 Select the item and press [ENT].
The editing screen for the selected item appears.
Youcanregisteroreditthename,Callsign,andmemo,
etc.
4 Press [ENT] after editing.
EditingarecompletedandtheCallsignlisteditingscreen
appears.
5 Press [A/B].
TheCallsignlistselectionscreenappears.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D74A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D74A in the language / languages: English as an attachment in your email.

The manual is 6.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D74A

Kenwood TH-D74A User Manual - German, Dutch, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info