696175
85
Zoom out
Zoom in
Previous page
1/129
Next page
16-3
LOCAL AREA CALL
Alocalareacall(localCQ)istheoutputofaCQthroughonly
onerepeater.AcallcanbemadebysettingalocalCQto
"TO"andpressing[PTT].
Setting the Access Repeater (FROM)
1 Press [MODE] to enter DR mode.
2 Press
[ ] (1s).
TheFROMselectionscreenappears.
3 Select[RepeaterList]andpress [ENT].
The world region, country, and group select screen
appears.
4 Select your area group and press [ENT].
The repeater list selection screen appears.
5 Select a nearby repeater from the repeater names or
state/prefecture names and press [ENT].
Theaccessrepeaterissetto[FROM].
Setting the Local CQ (TO)
1 Press [ ] (1s).
The destination selection screen appears. This screen also
appearswhenselecting[DestinationSelect]intheDigital
Function Menu.
2 Select[LocalCQ]andpress[ENT].
CQCQCQissetto[TO].
Checking Whether Signals Reach the Repeater
1 Press [PTT] (1s) and transmit.
2 Checktheresponse.
If< > appears within 3 seconds, this indicates that
signals are reaching the repeater you are using and
signals are being output normally from the destination
repeater. However, <>doesnotappearifthereisan
access from another station within 3 seconds. (Refer to the
table below.)
Transmitting
Press [PTT] to transmit.
Phenomenon Cause Treatment
No message is returned
from the access repeater
after transmission. (S-meter
indicator also does not
move.)
Incasethattheselectionfortherepeateryou
are using (access repeater) is incorrect.
Setthecorrectaccessrepeaterto[FROM].
Incasethattherepeaterfrequencyisincorrect
(or the duplex setting is incorrect).
Set the repeater frequency (or the duplex setting) correctly.
Incasethatitisoutoftherepeaterarea(orthe
signal does not reach the repeater).
Move to a location where the signal reaches the repeater or
access another repeater that the signal will reach.
The access repeater
Callsignand< >
appear after transmission.
IncasethatyourCallsignisnotregistered
to the D-STAR management server or the
registered information is different.
RegisteryourCallsigntotheD-STARmanagementserveror
checktheregisteredinformation.
Incasethattheotherstation'sCallsignisnot
registered to the D-STAR management server
or the registered information is different.
Checktheregistrationstatusoftheotherstation'sCallsign
on the D-STAR management server (only when the other
station is open in public.)
The destination repeater
Callsignand< >
appear after transmission.
Incasethatadestinationrepeatercannotbe
reached or the destination repeater is in use.
Waitawhileandcallagain.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D74A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D74A in the language / languages: English as an attachment in your email.

The manual is 6.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D74A

Kenwood TH-D74A User Manual - German, Dutch, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info