696175
30
Zoom out
Zoom in
Previous page
1/129
Next page
9-2
PROGRAM SCAN
Program scan is to scan within the range between the lower
limit frequency and upper limit frequency registered to
program scan memory. There are 50 program scan memory
fromL0/U0toL49/U49.
Setting Scan Limits
1 Select the frequency, mode, etc. to register.
2 Press [VFO].
3 Press [F], [MR].
Memory channel registration screen appears on the
display.
4 Tosetalowerlimitfrequency,selectchannel[L0].Toset
anupperlimitfrequency,selectchannel[U0].
5 Press [ENT].
The frequency is registered in the memory channel.
The picture below shows an example when a lower limit
frequency is set in L0.
6 Register the corresponding upper limit or lower limit
frequency.
Repeatsteps3to6.MemorychannelsfromL1/U1toL49/
U49canberegisteredsimilarly.
Using Program Scan
1 Adjustthefrequencywithintherangeoftheprogramscan
memory.
• WhentheVFOfrequencyiswithintheregistered
frequency range in the program scan memory,
[ProgramNo.0]appearsunderthefrequencydisplay.
2 Press [VFO] (1s).
The program scan starts and the dot of the 1 MHz digit
ashes.
3 To quit program scan, press [VFO].
Note:
Whenafrequencyrangeregisteredintheprogramscan
memory is duplicated, the range assigned to a smaller program
scan memory number will be applied.
Band scan is activated if [VFO] is pressed for more than 1
second outside the program scan memory frequency range.
MHz SCAN
MHz scan monitors a 1 MHz segment of the band, using
the current frequency step size. The current 1 MHz digit
determines the limits of the scan. For example, if the current
frequency is 145.400 MHz, then the scan range would be
from145.000MHzto145.995MHz(theexactupperlimit
depends on the current frequency step size).
1 Select your desired band.
2 Press [VFO].
3 Press []/[ ] or rotate the [ENC] control to select a
frequency within your desired 1 MHz range.
4 Press [MHz] (1s) to start scanning.
• Scanstartsatthecurrentfrequency.
• The1MHzdecimalpointblinkswhilescanningisin
progress.
• Toreversethescandirection,turnthe[ENC]
controlclockwise<orpress[]>(upwardscan)or
counterclockwise<orpress[]>(downwardscan).
5 To quit MHz Scan, press [MHz].
MEMORY SCAN
Use memory scan to monitor all Memory channels
programmed with frequency data.
1 Press [MR] (1s).
Scan starts at the current memory channel.
2 To quit memory scan, press [MR].
Note:
At least 2 Memory channels must contain data and must not be
lockedoutofscan.
Program scan memory and priority channel will be excluded
from the memory scan.
Ifthememoryrecallmethodissetto[CurrentBand],the
memory channel of the same frequency band as the current
memory channel will be scanned. The other memory channel
willbeskipped.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D74A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D74A in the language / languages: English as an attachment in your email.

The manual is 6.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D74A

Kenwood TH-D74A User Manual - German, Dutch, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info