696175
29
Zoom out
Zoom in
Previous page
1/129
Next page
9-1
9 SCAN
Scan is a useful feature for hands-off monitoring of your
favorite frequencies. Becoming comfortable with all types of
Scan will increase your operating efficiency.
This transceiver provides the following types of scans.
Scan Type Scan Range
Band Scan Scans all frequencies on the current band.
Memory Scan Scans all frequencies stored in the
Memory channels.
GroupLink
Scan
Scans memory channel in the plural
memory groups registered in the group
linklist..
Program Scan Scans all frequencies within the
programmed range, on the current band.
MHz Scan Scans all frequencies within a 1 MHz
range from the originating frequency.
CallScan
ScanstheCallchannelaswellasthe
currentlyselectedVFOfrequencyor
Memory channel.
Priority Scan PriorityScanchecksthePriorityChannel
every 3 seconds.
Note:
Adjustthesquelchlevelbeforeusingscan.Selectingasquelch
level too low could cause scan to stop immediately.
WhileusingCTCSSorDCS,scanstopsforanysignalreceived;
however, scan will immediately resume if the received signal
doesnotcontainthesameCTCSStoneorDCScodethatyou
selected.
Pressing and holding [PTT] causes scan to temporarily stop if it
isfunctioningonanonTXband.
SELECTING A SCAN RESUME METHOD
The transceiver stops scanning at a frequency or Memory
channelonwhichasignalisdetected.Itthencontinues
scanning according to which resume mode you have
selected.Youcanchooseoneofthefollowingmodes.
Time-Operated mode
Scan will stop temporarily once the squelch opens. Scan will
resume 5 seconds later (default setting) regardless of the
squelch status.
Carrier-Operated mode
Scan will stop temporarily once the squelch opens. Scan
will resume if the squelch remains closed for more than 2
seconds (default setting).
Seek mode
Scan will complete once the squelch opens, and it will not
resume.
1 Access Menu No. 130.
• Indigital(DV/DRmode),accessMenuNo.131.
2 SettheScanResumemodeto[Time](Time-Operated),
[Carrier](Carrier-Operated)or[Seek](Seek).
Time-Operate Resume Time
SettheholdtimefortheTime-Operatescanmethod.
Whenasignalisreceived,scanwillpauseatthatfrequency
forthedurationoftheholdtimeyouset.Whenthesettime
elapses, scan will resume (even if the signal is still being
received).
1 Access Menu No. 132.
2 Settheresumetimeto1~10sec.
Carrier-Operated Resume Time
SettheholdtimefortheCarrier-Operatescanmethod.
Whenasignalisreceived,scanwillpauseatthatfrequency.
Whenthesignalstops,scanwillresumeafterthedurationof
the hold time you set.
1 Access Menu No. 133.
2 Settheresumetimeto1~10sec.
BAND SCAN
Band scan monitors all frequency range that is stored in
MenuNo.100(ProgrammableVFO),usingthecurrent
frequency step size.
1 Select your desired operation band and frequency.
2 Press [VFO] (1s).
Band scan appears and scan starts at the current
frequency.
• The1MHzdecimalpointblinkswhilescanningisin
progress.
Note:
Whenstartingascanwithinthefrequencyrangeofthe
registered program scan memory, it is the program scan.
3 To quit band scan, press [VFO].
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D74A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D74A in the language / languages: English as an attachment in your email.

The manual is 6.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D74A

Kenwood TH-D74A User Manual - German, Dutch, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info