630892
8
Zoom out
Zoom in
Previous page
1/129
Next page
6
Problem Cause Solution
K
ettle not operating. No Power. Check kettle is plugged in.
Kettle unplugged. Check kettle is correctly located
to the powerbase.
Display screen blank/Selected Kettle unplugged. Press the ON/OFF button to
temperature not shown on display switch the kettle back on.
Normal Operation due:- The display will default to 100°C
To Keep Warm reaching end time when the kettle is switched back
of 30 minutes. on, to select another
No function selected within 30seconds. temperature refer to the
Kettle removed from powerbase. “Variable Temperature feature”
section.
Keep Warm not functioning. 100°C selected. Normal operation - Keep Warm
does not function if 100°C
selected although button will be
lit.
Kettle boiling instead of going into ON/OFF button pressed after Keep Do not press ON/OFF button
Keep Warm function. Warm button. after Keep Warm unless you
want to heat the water.
Selected Temperature not shown Kettle unplugged. The display will default to 100°C
on display. if unplugged.
Kettle not switching off automatically Kettle overfilled. Check water level is not above
after boiling. the Max level.
Long Switch Off Time.
Lid not closed. Check lid is closed correctly.
Long Switch Off Time or Switching Off Limescale/mineral build up on element Check that the element is free
too early. affecting operation. from scale before water boiled.
Incorrect Temperature Reading. Refer to “descaling” section
Kettle switching on and off during use. under care and cleaning.
Water splashing out of spout area. Filter not fitted in spout area. Always use the filter and do not
Kettle overfilled. overfill above the Max level.
Kettle stopped working during Boil dry protection operated due to Switch off and remove from the
operation. insufficient water in the kettle. powerbase.
Allow to cool down before
refilling.
When the kettle has cooled
down the switch will reset itself.
Check the water level is above
the minimum level.
If none of the above solve the problem see “Service & Customer Care”.
troubleshooting guide
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood SJM610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SJM610 in the language / languages: All languages as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info