630892
7
Zoom out
Zoom in
Previous page
1/129
Next page
Y
our kettle will boil and switch off automatically. To re-
boil, wait a few seconds - the on/off switch needs
t
ime to reset.
N
ote - To interrupt the boiling ensure that
the switch is in the off position before
r
emoving from the powerbase.
I
f you experience problems with your kettle
switching on and off during use or switching
off before boiling, check that the flat
element is free from scale - see
“descaling”.
Your kettle is fitted with a filter to hold back limescale
particles.
If you find drops of water under your kettle, don’t
worry - it is just condensation.
boil-dry protection
If you switch on with too little water, your kettle will
cut out automatically. Switch off, remove from the
powerbase and let it cool down before re-filling. When
it has cooled down, the switch will reset itself.
care and cleaning
Before cleaning, unplug your kettle and let it cool
down.
the outside and powerbase
Wipe with a damp cloth, then dry. Do not use
abrasives - they will scratch the metal and plastic
surfaces.
the inside
Even though your kettle comes with a filter, you still
need to clean the inside (and the filter) regularly.
the filter
1 Open the lid.
2 Slide the filter out .
3 either rinse under the tap or use a soft brush.
or when descaling your kettle, drop the filter in too.
Rinse thoroughly.
4 Slide the filter back in to refit .
descaling
Regular descaling of the flat element will improve the
performance of your kettle. If the kettle is not
descaled regularly the build up of limescale may result
in the following:
problems may be experienced with the kettle
switching on and off during use or switching off
before boiling.
the kettle may take longer to boil.
the flat element may be damaged.
P
lease note: Failure to descale your kettle may invalidate
your guarantee.
W
hen limescale starts to build up on the heating
e
lement, buy a suitable descaler and descale your
kettle. After descaling, boil with fresh water several
t
imes and discard. Clean any descaler off the kettle -
i
t can damage the parts.
Some regions of the country have chalky water. This
makes boiled water look cloudy and leaves a deposit
on the side of the kettle. This is normal but can be
removed with regular cleaning.
Alternatively, to reduce limescale build up, use filtered
water to fill your kettle.
service and customer care
If the cord is damaged it must, for safety reasons, be
replaced by KENWOOD or an authorised KENWOOD
repairer.
If you experience any problems with the
operation of the kettle, before calling for
assistance refer to the troubleshooting
guide.
If you need help with:
using your kettle
servicing or repairs
Contact the shop where you bought your kettle.
Designed and engineered by Kenwood in the UK.
Made in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment
and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As a
reminder of the need to dispose of household
appliances separately, the product is marked with a
crossed-out wheeled dustbin.
5
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood SJM610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SJM610 in the language / languages: All languages as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info