Manual Kenwood SB270 series (page 4 of 139) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

510858

Zoom out

Zoom in

1/139

●

After blending, some drinks may not

be completely smooth due to seeds

or the fibrous nature of ingredients.

●

Some drinks may separate on

standing, therefore, it’s best to drink

them straight away. Separated

drinks should be stirred before

drinking.

important

●

Never blend more than the

maximum capacity of 1500ml

marked on the goblet.

●

Never blend dry ingredients (eg

spices, nuts) or run the Smoothie

Blender empty.

●

Don’t use the Smoothie Blender as

a storage container. Keep it empty

before and after use.

●

Some liquids increase in volume and

froth during blending eg milk, so do

not overfill and ensure the lid is

correctly fitted.

●

To ensure long life of your Smoothie

Blender, never run it continuously for

longer than 60 seconds.

●

Never blend food that has formed a

solid mass during freezing, break it

up before adding to the goblet.

care and cleaning

●

Always switch off, unplug and

dismantle before cleaning.

●

Never let the power unit, cord or

plug get wet.

●

Empty the goblet before unscrewing

the blade unit.

●

Always wash immediately after use.

Don’t let food dry onto the goblet

assembly as this will make cleaning

difficult.

●

Don’t wash any part in the

dishwasher.

●

Regularly dismantle the tap and

clean the parts thoroughly.

Smoothie Blender unit

Before dismantling the Smoothie

Blender, half fill the goblet with warm

water. Fit the lid and stirrer then

place on the power unit. Switch to

low ‘ ’ and whilst running open the

tap and allow the water to drain into

a container to clean the valve. This

can be repeated until the water runs

clear. If further cleaning is necessary

dismantle the unit first.

power unit

●

Wipe with a damp cloth, then dry.

●

Push excess cord into the back of

the power unit.

blade unit

1 Remove and wash the sealing ring.

2 Don’t touch the sharp blades - brush

them clean using hot soapy water,

then rinse thoroughly under the tap.

Don’t immerse the blade assembly in

water.

3 Leave to dry upside down away from

children.

goblet, lid, cap and stirrer

Wash by hand, rinse with clean

water then dry.

cleaning the tap

Remove the tap assembly from the

goblet, then soak the tap in hot

soapy water with the valve open ᕢ.

Wash thoroughly then rinse and dry.

Wash and dry the goblet then refit

the tap ensuring that the seal is

correctly positioned on the goblet ᕣ.

dismantling the tap

1 Unscrew the tap lever from the tap

body ᕤ. Do not remove the

clear plastic cover from the

assembly.

2 Wash the components then rinse

and dry thoroughly.

3 Reassemble the unit by reversing the

above procedure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SB270 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood SB270 series Manual

Product: