510857
4
Zoom out
Zoom in
Previous page
1/139
Next page
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
Some drinks may separate on
standing, therefore, it’s best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
Never blend more than the
maximum capacity of 1500ml
marked on the goblet.
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
Don’t use the Smoothie Blender as
a storage container. Keep it empty
before and after use.
Some liquids increase in volume and
froth during blending eg milk, so do
not overfill and ensure the lid is
correctly fitted.
To ensure long life of your Smoothie
Blender, never run it continuously for
longer than 60 seconds.
Never blend food that has formed a
solid mass during freezing, break it
up before adding to the goblet.
care and cleaning
Always switch off, unplug and
dismantle before cleaning.
Never let the power unit, cord or
plug get wet.
Empty the goblet before unscrewing
the blade unit.
Always wash immediately after use.
Don’t let food dry onto the goblet
assembly as this will make cleaning
difficult.
Don’t wash any part in the
dishwasher.
Regularly dismantle the tap and
clean the parts thoroughly.
Smoothie Blender unit
Before dismantling the Smoothie
Blender, half fill the goblet with warm
water. Fit the lid and stirrer then
place on the power unit. Switch to
low ‘ ’ and whilst running open the
tap and allow the water to drain into
a container to clean the valve. This
can be repeated until the water runs
clear. If further cleaning is necessary
dismantle the unit first.
power unit
Wipe with a damp cloth, then dry.
Push excess cord into the back of
the power unit.
blade unit
1 Remove and wash the sealing ring.
2 Don’t touch the sharp blades - brush
them clean using hot soapy water,
then rinse thoroughly under the tap.
Don’t immerse the blade assembly in
water.
3 Leave to dry upside down away from
children.
goblet, lid, cap and stirrer
Wash by hand, rinse with clean
water then dry.
cleaning the tap
Remove the tap assembly from the
goblet, then soak the tap in hot
soapy water with the valve open .
Wash thoroughly then rinse and dry.
Wash and dry the goblet then refit
the tap ensuring that the seal is
correctly positioned on the goblet .
dismantling the tap
1 Unscrew the tap lever from the tap
body . Do not remove the
clear plastic cover from the
assembly.
2 Wash the components then rinse
and dry thoroughly.
3 Reassemble the unit by reversing the
above procedure.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood SB260 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SB260 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info