510857
3
Zoom out
Zoom in
Previous page
1/139
Next page
key
stirrer
cap
lid
goblet
handle
tap assembly - tap lever
tap assembly - tap body
sealing ring
blade assembly
power unit
cord storage
to use your smoothie
blender
1 Fit the sealing ring over the blade
assembly.
2 SB260 series
Screw the blade assembly onto the
goblet.
SB270 series
To fit the blade assembly to the
goblet, line up the symbol on
the blade assembly with the
symbol on the goblet. Then turn to
the symbol to lock into place.
3 Screw the tap assembly onto the
goblet. Check that the dispensing
tap lever is in the off position .
4 Place the assembled goblet on the
power unit.
5 Place the liquid ingredients into the
goblet.
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked LIQUIDS for either 2 or
4 servings.
6 Add ice or frozen ingredients to the
goblet.
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
FROZEN INGREDIENTS for the
corresponding number of servings.
7 SB260 series
Screw the lid onto the goblet.
SB270 series
Push the lid onto the goblet.
8 Either push the cap into the lid or
place the stirrer in the hole.
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen foods with
liquids are used.
9 Plug in. (SB270 series - the base will
illuminate).
10 Press the low button for up to 30
seconds, this is to start the mixing
process, then press the high
button. Allow the ingredients to
blend until smooth.
Use the stirrer by moving it in an anti
clockwise direction.
11 Place a glass underneath the tap,
press the low ’ button and pull
forward the dispensing tap lever.
Thinner drinks may dispense without
having to switch on the power unit.
Use the stirrer to assist when
dispensing thick smoothie drinks.
To help dispense the last amount of
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
When the glass is full, switch off and
release the lever. Unplug after use.
OR
Switch off ’, remove the goblet
and pour the drink. Unplug after
use.
hints
To make a thinner smoothie drink
add more liquid.
To make a thicker smoothie drink
add more frozen ingredients but do
not exceed the frozen limit marked
on the goblet.
Before fitting the lid, push the solid
ingredients into the liquid using the
stirrer.
Use the pulse ‘P’ button to operate
the power unit in a start stop action
to control the texture of your drink.
Take care as this automatically
selects the higher speed and may
cause the drink to be thrown up the
sides and onto the lid of the goblet.
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood SB260 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SB260 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info