161383
5
Zoom out
Zoom in
Previous page
1/20
Next page
KTF-3010/KTF-2010 (En)
5
The system control operations
Remote Control
Lets you operate this unit with the system remote supplied with the amp or receiver.
Automatic Operation (except [XR] equipment)
Automatically switches the input selector on the amp when you operate one of the tuning keys on this unit.
Automatic EON reception
Even if the input selector on the amp is set to a source other than tuner, the amp will automatically switch to tuner when an EON
broadcast you are waiting for is received. When using equipment connected in the [SL16] mode, the amp will switch back to the
original input source when EON broadcast has finished. %
Switching from [SL16] to [XS8]
Use the rear panel switch to switch to the system control [XS8] and [SL16] modes. Do this operation
after completing all connections.
÷ Remove the AC power cord plug from the wall outlet before switching modes.
÷ This operation will not affect items stored in the memory.
SL16 XS 8
j
Connection of antenna
AM loop antenna connection
The supplied antenna is for indoor use. Place it as far as possible
from the main system, TV set, speaker cords and power cord,
and set it to a direction which provides the best reception.
Do not plug in the power lead until all connections are
completed.
ANTENNA
GND
FM 75
BA
AM
ANTENNA
GND
AM
FM 75
BA
SYSTEM
CONTROL
ƒ
OUTPUT
R
L
SL16 XS 8
Connection method to each antenna terminal
1 Push lever 2 Insert cord 3 Return lever
FM indoor antenna connection
The accessory antenna is for temporary indoor use only.
For stable signal reception we recommend using an
outdoor antenna. Remove the indoor antenna if you
connect one outdoors.
FM outdoor antenna
connection
Lead the 75 coaxial cable connected to
the FM outdoor antenna into the room and
connect it to the FM 75 terminal.
Use a commercially
available antenna
adaptor.
In certain areas, FM broadcast can be received by connecting the antenna cable to a wall antenna terminal (CATV antenna socket, etc.).
If there is only one antenna, connect it to side A of the
antenna terminal.
The figure shows an example for the KTF-3010
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood ktf 3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood ktf 3010 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info