630853

Kenwood KM244 Prospero Manual

7
Zoom out
Zoom in
Previous page
1/182
Next page
to fit and use the splashguard
1
Fit the bowl into the base and add the ingredients.
2
Fit the tool then lower the mixer head
3 Fit the splashguard onto the bowl by sliding the cut
a
way section around the mixer head .
4
To remove the splashguard reverse the above
procedure.
●
D
uring mixing, ingredients can be added directly to
the bowl via the chute.
care and cleaning
●
Always switch off and unplug before cleaning.
power unit
●
Wipe with a damp cloth, then dry.
●
Never use abrasives or immerse in water.
bowl, tools, splashguard, removable guard
on dough hook
●
Wash by hand, then dry thoroughly or wash in the
dishwasher.
●
Never use a wire brush, steel wool or bleach to clean
your stainless steel bowl. Use vinegar to remove
limescale.
●
Keep away from heat (cooker tops, ovens,
microwaves).
Blenders AT282 and AT283
(if supplied)
U
se the blender for soups, drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs, chopping nuts and
crushing ice.
safety
●
SCALD RISK: Hot ingredients should be allowed to
cool to room temperature before blending.
●
Don’t touch the sharp blades. Keep the blade unit
away from children.
●
Only use the goblet with the blade unit supplied.
●
Never attempt to fit the blade unit to the machine
without the goblet fitted.
●
Always unplug the machine before putting your hands
or utensils in the goblet.
●
Never run the blender empty.
●
Only operate the blender with the lid in place.
●
Never fit the blade unit to the power unit
without the blender goblet fitted.
●
Always take care when handling the blade assembly
and avoid touching the cutting edge of the blades
when cleaning.
●
When removing the blender from the power unit:
●●
switch off;
●●
wait until the blades have completely stopped;
●●
model AT283 care should be taken not to
unscrew the goblet from the base assembly
●
Misuse of your blender can result in injury.
important
The skirt on the bottom of the AT282 acrylic
goblet is fitted during manufacture and no
attempt should be made to remove it.
●
The attachment will not operate if it is
incorrectly assembled or incorrectly fitted
to the kitchen machine or if the medium
speed outlet cover is not fitted.
●
Never run the blender for longer than one minute - it
will overheat. Switch off as soon as you have the right
consistency.
●
Don’t put dry ingredients into the blender before
switching on. Cut them into cubes, then remove the
filler cap and drop the cubes through the hole in the
lid whilst the machine is running.
●
model AT282 don’t process spices such as cloves,
dill and cumin seeds - they damage the acrylic.
●
Don’t use the blender as a storage container. Keep it
empty before and after use.
●
Never crush ice on its own, always add a little water.
●
model AT282 never blend more than 1.5 litres (2
pints 12fl oz) - less for frothy liquids like milk shakes.
5
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KM244 Prospero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KM244 Prospero in the language / languages: All languages as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info