630853
6
Zoom out
Zoom in
Previous page
1/182
Next page
4
Press down on the head release lever and lower the
m
ixer head until it locks into position.
5 Plug into the power supply then switch on and turn
the speed switch to the desired setting. To switch off
t
urn to ‘0’.
Switch to pulse for short bursts
6 Unplug from the power supply.
7
Raise the mixer head and whilst holding it steady, pull
the tool from the outlet.
important
Some movement of the mixer head is
normal when mixing heavy loads such as
bread dough.
If the mixer head is raised during operation, the
machine will stop working straight away. To re-start
the mixer, lower the mixer head, turn the speed
switch to the off position, wait a few seconds and
then re-select the speed. The mixer should resume
operating straight away.
If for any reason power to the mixer is interrupted and
the machine stops working, turn the speed switch to
the off position, wait a few seconds and then re-select
the speed. The mixer should resume operating
straight away.
The mixer will not operate unless all the
outlet covers are correctly fitted to the
machine.
If you hear the machine labouring either switch off and
remove
some of the mixture or increase the speed.
Always remove attachments fitted to the medium and
high speed outlets before raising the mixer head.
hints
Switch off and scrape the bowl with a spatula when
necessary.
Eggs at room temperature are best for whisking.
Before whisking egg whites, make sure there’s no
grease or
egg yolk on the whisk or bowl.
Use cold ingredients for pastry unless your recipe
states otherwise.
When creaming fat and sugar for cake mixes, always
use the fat at room temperature or soften it first.
Your mixer has been fitted with a ‘soft start’ feature to
minimise spillage. However if the machine is switched
on with a heavy mixture in the bowl such as bread
dough, you may notice that the mixer takes a few
seconds to reach the selected speed.
points for bread making
i
mportant
N
ever exceed the maximum capacities stated - you
will overload the machine.
S
ome movement of the mixer head is normal when
m
ixing heavy loads such as bread dough.
The ingredients mix best if you put the liquid in first.
A
t intervals stop the machine and scrape the mixture
off the dough hook.
Different batches of flour vary considerably in the
quantities of liquid required and the stickiness of the
dough can have a marked effect on the load imposed
on the machine. You are advised to keep the machine
under observation whilst the dough is being mixed;
the operation should take no longer than 6-8 minutes.
speed switch
These are a guide only and will vary depending upon
the quantity of mix in the bowl and the ingredients
being mixed.
beater
creaming fat and sugar start on min gradually
increasing to a higher speed
beating eggs into creamed mixtures use a
medium to high speed
folding in flour, fruit etc use a low to medium
speed
all in one cakes start on a low speed gradually
increasing to a higher speed
rubbing fat into flour use a low to medium speed
whisk
Gradually increase to maximum
dough hook
Use a low to medium speed
maximum capacities
shortcrust pastry 450g flour weight
sponge cake (one stage mix) 1.6 Kg total mix
fruit cake mix 1.8 Kg total mix
bread dough 500g flour weight
egg whites 8
electronic speed sensor control
Your mixer is fitted with an electronic speed sensor
control that is designed to maintain the speed under
different load conditions, such as when kneading
bread dough or when eggs are added to a cake mix.
You may therefore hear some variation in speed
during the operation as the mixer adjusts to the load
and speed selected - this is normal.
P
4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KM244 Prospero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KM244 Prospero in the language / languages: All languages as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info