667463
13
Zoom out
Zoom in
Previous page
1/68
Next page
English
|
13
5 Repeat steps 3 and 4, and complete the
Security Code.
6 Confirm the Security Code
Press the Control knob for at least 3 second.
When “RE-ENTER” is displayed, “CODE” is also
displayed.
7 Do the step 3 through 6 operation, and reenter
the Security Code.
APPROVED” is displayed.
The Security Code function activates.
If you enter the wrong Code in steps 3 through 5, repeat
from step 3.
When the Security Code function is activated, “SECURITY
SET changes to “SECURITY CLR.
To deactivate the Security Code function, see the next
section <Deactivating Security Code>.
8 Exit Security Code mode
Press the [M.JOG] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1 Turn the power ON.
2 Do the step 3 through 6 operation, and enter
the Security Code.
APPROVED” is displayed.
Deactivating Security Code
Deactivating the Security Code function.
1 Select Security Code item during Menu mode
Select the “SECURITY CLR” display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Security Code mode
Press the Control knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
3 Select the digits to enter
Push the Control knob towards right or left.
4 Select the Security Code numbers
Push the Control knob towards up or down.
5 Repeat steps 3 and 4, and complete the
Security Code.
6 Press the Control knob for at least 3 second.
“CLEAR” is displayed.
The Security Code function deactivates.
7 Exit Security Code mode
Press the [M.JOG] button.
If the entered security code is incorrect, “ERROR” is
displayed. Enter a correct security code.
Manual Clock Adjustment
1 Select Clock Adjustment item during Menu
mode
Select the “CLOCK ADJUST” display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3 Adjust the time
Push the control knob towards up or down to
adjust the hours and right or left to adjust the
minutes.
4 Exit Clock adjustment mode
Press the [M.JOG] button.
Function of KDC-X492
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the unit.
1 Select AMP Control item during Menu mode
Select the AMS CONTROL display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards up or down.
For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4 Adjust the AMP Control item
Push the Control knob towards right or left.
5 Exit AMP Control mode
Press the [M.JOG] button.
B64-3955-00_English_K_r1.indd 13B64-3955-00_English_K_r1.indd 13 07.11.12 5:19:59 PM07.11.12 5:19:59 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-MP338 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-MP338 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info