667463

Kenwood KDC-MP338 Manual

12
Zoom out
Zoom in
Previous page
1/68
Next page
12
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Menu Operation
Menu System
Set up the following functions;
Display Setting Setting overview
Source
“SECURITY
SET”/
“SECURITY
CLR”
Refer to
page 12
Sets/Resets security code
“CLOCK
ADJUST”
Refer to
page 13
Sets the clock.
“DISPLAY” ON*/OFF Turns off the display when no
operation is performed.
—
“DIMMER”
*
1,2,3
AUTO*/OFF Dims the display in conjunction
with the light switch of the
vehicle.
“DIMMER”*
4
ON/OFF* Adjusts the brightness of
the display according to the
surrounding illumination.
—
“DOT LINE” ON*/OFF Specifies whether to display the
red dotted line on the display.
“SWPRE”*
3,4
REAR*/
SUB-W
Sets the preout output.
“AMP”*
1,2
ON*/OFF Turns on/off the built-in amplifier.
“AMS
CONTROL”*
1
Refer to
page 13
Controls the connected LX
amplifier.
—
“ZONE2”*
1,2,3
REAR*/
FRONT
Specifies the destination of AUX
input sound when the Dual Zone
function is turned on.
“SUPREME” ON*/OFF Turns ON/OFF the Supreme
function.
“CRSC” OFF/ON* Switches to Monaural to decrease
noise when reception is poor.
“NAME SET” Refer to
page 14
Sets the display when switched
to AUX source.
“SCROLL” AUTO*/
MANUAL
Specifies whether the text is
scrolled automatically.
—
“RECEIVE
MODE”
Refer to
page 14
Sets the receive mode of HR radio.
“ESN” — Displays the Electronic Serial
Number of satellite radio.
“AUX” OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
“CD READ” 1*/2 Sets the CD read mode.
“DEMO
MODE”
Refer to
page 14
Specifies whether to enable
demonstration.
—
*Factory setting
* Function of KDC-X492.
* Function of KDC-MP438U.
* Function of KDC-MP408U.
* Function of KDC-MP338.
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set during FM reception.
: Can be set during Satellite radio source.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
— : Can be set during all sources.
1 Enter Menu mode
Press the [M.JOG] button for at least 1 second.
“MENU” is displayed.
2 Select the menu item
Push the Control knob towards up or down.
3 Set the menu item
Push the Control knob towards right or left.
4 Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• ”ZONE2” is displayed when ”2ZONE” in <Audio Setup>
(page 7) is set to ”ON.
• Refer to the <Appendix> (page 16) for the details of the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Activating Security Code
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1 Select Security Code item during Menu mode
Select the “SECURITY SET” display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Security Code mode
Press the Control knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
3 Select the digits to enter
Push the Control knob towards right or left.
4 Select the Security Code numbers
Push the Control knob towards up or down.
B64-3955-00_English_K_r1.indd 12B64-3955-00_English_K_r1.indd 12 07.11.12 5:19:58 PM07.11.12 5:19:58 PM
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-MP338 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-MP338 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info