36064
28
Zoom out
Zoom in
Previous page
1/36
Next page
Installation / Installation / Instalación / Instalação
Accessories / Accessoires / Accesorios / Acessórios
A × 1 B × 4 C × 4 D × 1 E × 1
Installation Procedure / Procédure d’installation /
Procedimiento de instalación / Procedimentos para Instalação
1
Removing the transportation screws
Remove all 3 transportation screws for
protecting the internal mechanism before
you start to install the unit.
After removing the transport screw, retain
it carefully and attach it again before
transporting the unit again.
2 Angle adjustment switches
The angle adjustment switches on the
both side of the unit are to be set
according to the angle of installation of
the CD auto changer. Set both of the two
switches to the same position. If the
switches are not set properly, sound skip
or other malfunction may occur.
Set the angle adjustment switches with a
coin or other flat object.
Change the switch step by step by
detaching and reusing the obdect at the
end of each step.
3 Use the holes marked to install the unit.
(See page 30)
Do not tighten the screw B too securely at
the time of installation, but tighten it
securely after having fixed the bracket A.
(See page 30)
1 Comment enlever les vis de transport
Retirez les 3 vis de transport pour la
protection du mécanisme interne avant de
commencer l'installation.
Après avoir retiré la vis de transport,
rangez-la avec soin et n'omettez pas de la
poser à nouveau avant de transporter
l'appareil.
2 Commutateur de réglage d’angle
Les commutateurs de réglage d’angle qui
se trouvent de chaque coté de l’appareil
doivent être placés dans la position
correspondant à l’angle d’installation du
changeur de CD. Les deux commutateurs
doivent être dans la même position. SI
ces commutateurs ne sont pas
convenablement réglés, il peut y avpir des
ratées de son ou d’autres problèmes de
fonctionnement.
Réglez les commutateurs d'angle
d'ajustement avec une pièce de monnaie
ou un autre objet plat.
Changer le commutateur pas à pas en
détachant et un utilisant à nouveau l’objet
à la fin de chaque opération.
3 Utilisez les trous marqués pour installer
l'appareil. (Voir page 30)
Lors de l’installation, ne serrer
complètement la vis B qu’après avoir
monté le support A. (Voir page 30)
2ATTENTION
REMARQUE
2CAUTION
NOTE
Transportation screws /
Vis de transport /
Tornillos de transporte /
Parafusos de transporte
'
28
KDC-CX89/C71(KE)(En,F,Es,P) 02.1.30 1:26 PM Page 28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-CX89 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-CX89 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info