606310
22
Zoom out
Zoom in
Previous page
1/100
Next page
22
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
DSP settings (KDC-X998, KDC-BT958HD)
5-7. Delay time control
Adjusting fine tuning of the speaker position
compensation value specified at <5-3. Car type
selection> (page 19).
Preparation for setting
• If you specify the distance from the center of the currently
set listening position to every speaker, the delay time will
be automatically computed and set.
1. Determine the center of the currently set listening
position as the reference point ( in the illustration shown
below).
2. Measure the distances from the reference point to the
speakers.
3. Calculate the differences between the distance of the
furthest speaker and other speakers.
4. Input the differences calculated in step 3 for individual
speakers.
5. Adjust gain for individual speakers. A sound image will be
shifted to the speaker with increased gain.
Example: When “Front is selected as the listening position
(<5-6. Listening position setting> (page 21)).
Front R
Front L
SW RSW L
Rear R
Rear L
1.7 feet
4.9 feet
+0 feet
+3.2 feet
2.6 feet
+2.3 feet
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Pro Setup” > “DTA
Settings” > “DTA using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a speaker using [Control] knob.
Speaker Display Range
Front Left speaker “FrontL 0 – 20.01 feet
Front Right speaker “FrontR” 0 – 20.01 feet
Rear Left speaker “RearL 0 – 20.01 feet
Rear Right speaker “RearR” 0 – 20.01 feet
Subwoofer Left “SW L 0 – 20.01 feet
Subwoofer Right “SW R” 0 – 20.01 feet
(Colored text: Factory setting)
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT858U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT858U in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info