606310
20
Zoom out
Zoom in
Previous page
1/100
Next page
20
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
DSP settings (KDC-X998, KDC-BT958HD)
5-4. Speaker setting
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items.
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Pro Setup” >
“Speaker Setting using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a speaker type using [Control] knob.
Speaker type Setting item Setting value
“Front” Front speaker
location
Door, “On Dash, “Under Dash”
“SIZE”
Front speaker size
KDC-X998
“O.E.M., “3 1/2in”, “4in”, “43/4in”,
“5in”, “6 1/2in, “63/4in”, “7in”,
“4x6”, “5x7”, “6x8”, “6x9”, “7x10”
KDC-BT958HD
“Small”, “Medium, “Large
“TW” Tweeter size
“None”, “Small”, “Medium, “Large”
“Rear” Rear speaker
location
Door, “Rear Deck”
(“2nd Row, “3rd Row[1])
“SIZE”
Rear speaker size
KDC-X998
“None”, “O.E.M., “3 1/2in, “4in”, “4
3/4in”, “5in”, “6 1/2in, “63/4in”,
“7in”, “4x6”, “5x7”, “6x8”, “6x9”,
“7x10”
KDC-BT958HD
“None”, “Small”, “Medium, “Large”
“SubWoofer” “SIZE”
Speaker Size Subwoofer
KDC-X998
“None”, “6 1/2inch, “8inch”,
10inch, “12inch”, “15inch Over”
KDC-BT958HD
“None”, “Small”, “Large
(Colored text: Factory setting)
[1] Value set when “Minivan” or “Minivan (Long)” is selected
as described in <5-3. Car type selection> (page 19).
Select a setting item using [Control] knob.
Select a setting value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
5-5. X’Over setting
Fine adjusting the following setting values
corresponding to the X’Over values set in the
section <5-4. Speaker setting> (page 20).
Press [SRC] and select a source other than
Standby (“STANDBY”) using [Control] knob.
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Pro Setup” >
“X’Over using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a speaker type using [Control] knob.
Speaker type Setting item Setting value
“Front” “FC”
Front high pass filter
KDC-X998
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 Hz
KDC-BT958HD
Through, 40, 60, 70, 80, 100, 120,
150, 180, 220 Hz
“SLOPE”[1][2] Front high pass slope
-6, -12, -18, -24 dB/Oct
“GAIN” Front gain
-8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB
“Rear” “FC”
Rear high pass filter
KDC-X998
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 Hz
KDC-BT958HD
Through, 40, 60, 70, 80, 100, 120,
150, 180, 220 Hz
“SLOPE”[1][2] Rear high pass slope
-6, -12, -18, -24 dB/Oct
“GAIN” Rear Gain
-8, -7, -6, -5, -4, -3, -2, -1, 0 dB
“SubWoofer” “FC”
Subwoofer low pass filter
KDC-X998
30, 40, 50, 60, 70, 80, 90, 100, 120,
150, 180, 220, 250, Through Hz
KDC-BT958HD
40, 60, 70, 80, 100, 120, 150, 180,
220, Through Hz
“SLOPE”[1][2] Subwoofer slope
-6, -12, -18, -24 dB/Oct
“GAIN” Subwoofer gain
-8 ,-7, -6, -5, -4, -3, -2, -1, 0 dB
“PHASE” Subwoofer phase
“REV” (180°)/ “NML (0°)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT858U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT858U in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info