Manual Kenwood kac 526 (page 27 of 76) (English)

165284

Zoom out

Zoom in

1/76

— 27 —

Adjust the delay time for centre output.

Display and setting:

"CNTR DTA" : 0.0m / 0.1m / 0.3m / 0.4m / 0.6m / 0.7m / 0.9m /

1.0m / 1.2m / 1.3m / 1.5m

• You cannot operate when the “PCM Center“ is set to "OFF"

(page 29) <When playing with the 2ch PCM signal>.

• You cannot operate when the “Multi CH“ is set to “2/2“ or

“2/0“ (page 29) <When playing with multi-channels>.

NOTE

10.Delay Time for the Centre Speaker

Adjust the phase for Sub Woofer output.

Display and setting:

"SW Phase" : Normal (0°) / Reverse (180°)

You cannot operate when the “Sub Woofer“ is set to “OFF“

(page.29).

NOTE

11.Phase for Sub Woofer Output

Press the #1 - #6 button for at least two seconds.

Recalling your settings of the Crossover network/Delay time

Press the #1 - #6 button for the desired crossover network and

delay time setting.

12.Storing Your Setting of the Crossover

network/Delay time

Surround Processor Control Setting:

Adjust various parameters of sound quality.

Hold down the Q button to enter the control mode.

Selecting mode

Press either the FM or AM button.

Each time the button is pressed, the adjustment mode will

change.

Please refer to the following for the contents of the

adjustment modes.(Items 1-10 can be adjusted in this

Adjustment mode.)

Adjust each mode

Press the 4/¢ button.

Please refer to the following for the adjusting values.

Press the Q button to end the control mode.

When the Noise sequencer is turned ON, only item 10 can be

adjusted.

NOTE

You can recall the best audio setting preset for different types

of the music.

Display and Setting:

“FLAT“ / “POPS“ / “ROCK“ / “DANCE“ / “VOCAL“ /

“CLASSIC“.

•“User” displays each item when it’s adjusted.

• Not available during the Dual zone system is on.

NOTE

1.Recalling the Kenwood Preset Sound

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kac 526 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood kac 526 Manual

Product: