165284

Kenwood kac 526 Manual

26
Zoom out
Zoom in
Previous page
1/76
Next page
— 26 —
English
Adjust the frequency of the Low-pass filter for Sub Woofer
output.
Display and setting the frequency:
"SW LPF" : 30Hz / 60Hz / 90Hz / 120Hz / 150Hz / 180Hz /
250Hz
7.Low-pass Filter for Sub Woofer Output
Adjust the delay time for sub woofer output.
Display and setting:
"SW DTA" : 0.0m / 0.1m / 0.3m / 0.4m / 0.6m / 0.7m / 0.9m /
1.0m / 1.2m / 1.3m / 1.5m / 1.6m / 1.8m / 1.9m /
2.1m / 2.2m / 2.4m / 2.5m / 2.7m / 2.8m / 3.0m /
3.3m / 3.6m / 3.9m / 4.2m / 4.5m / 4.8m / 5.1m /
5.4m / 5.7m / 6.0m
• You cannot operate when the “Sub Woofer“ is set to “OFF“(
page.29 ).
NOTE
8.Delay Time for the Sub Woofer
Adjust the frequency of the High-pass filter for Centre output.
Display and setting the frequency:
"CNTR HPF" : THROUGH / 30Hz / 60Hz / 90Hz / 120Hz / 150Hz
/ 180Hz / 250Hz
Display and setting the slope:
"CNTR Slope" : 12dB / 18dB / 24dB
• You cannot operate when the “Sub Woofer“ is set to “OFF“
(page 29).
•You cannot operate when the “PCM Center“ is set to "OFF" (page
29) <When playing with the 2ch PCM signal>.
•You cannot operate when the “Multi CH“ is set to “2/2“ or “2/0“
(page 29) <When playing with multi-channels>.
NOTE
9.High-pass Filter for Centre Output
Audio effect control features
<When the KDS-P901 is connected>
Adjust the delay time for rear left output.
Display and setting:
"R-L DTA" : 0.0m / 0.1m / 0.3m / 0.4m / 0.6m / 0.7m / 0.9m /
1.0m / 1.2m / 1.3m / 1.5m / 1.6m / 1.8m / 1.9m /
2.1m / 2.2m / 2.4m / 2.5m / 2.7m / 2.8m / 3.0m /
3.3m / 3.6m / 3.9m / 4.2m / 4.5m / 4.8m / 5.1m /
5.4m / 5.7m / 6.0m
You cannot operate when the “Multi CH“ is set to “3/0“ or “2/0“
( page 29 ) <When playing with multi-channels>.
NOTE
6.Delay Time for the Rear Left Speaker
Adjust the delay time for rear right output.
Display and setting:
"R-R DTA" : 0.0m / 0.1m / 0.3m / 0.4m / 0.6m / 0.7m / 0.9m /
1.0m / 1.2m / 1.3m / 1.5m / 1.6m / 1.8m / 1.9m /
2.1m / 2.2m / 2.4m / 2.5m / 2.7m / 2.8m / 3.0m /
3.3m / 3.6m / 3.9m / 4.2m / 4.5m / 4.8m / 5.1m /
5.4m / 5.7m / 6.0m
You cannot operate when the “Multi CH“ is set to “3/0“ or “2/0“
( page 29 ) <When playing with multi-channels>.
NOTE
5.Delay Time for the Rear Right Speaker
Display and setting the slope:
"SW Slope" : 12dB / 18dB / 24dB
You cannot operate when the “Sub Woofer“ is set to "OFF" ( page
29 ).
NOTE
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kac 526 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kac 526 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info