463570

Kenwood FP971 Manual

10
Zoom out
Zoom in
Previous page
1/59
Next page
7
troubleshooting guide
P
roblem Cause Solution
The processor will not operate No power - power on light not lit. Check processor is plugged in.
B
owl not locked on correctly. Check bowl is located and interlocked correctly and the handle is situated
towards the right hand side.
Lid not locked correctly. Check that the lid interlock is located correctly into the handle area.
L
arge pusher not fitted. Fit the large pusher.
The processor will not operate if the bowl, lid or large pusher
are not interlocked correctly.
If none of the above check the fuse/circuit breaker in
your home.
Processor stops or slows Overload protection operated. Switch off, unplug and allow the appliance to cool down for approximately
during processing Processor overloaded or overheated during 15 minutes.
operation.
Maximum capacity exceeded. Refer to the speed chart for maximum capacities to process.
Poor performance of Refer to hints in relevant “using the attachment” section. Check attachments are assembled correctly.
tools/attachments.
Power On light flashing Normal operation Check interlocks are engaged correctly.
The light will flash if the bowl, lid, liquidiser or
mill are not fitted to the power unit or not locked in
place correctly.
Auto and Power On light Normal operation Check interlocks are engaged correctly or press the Auto button to switch
flashing The light will flash if the off the Auto function.
Auto selected but interlocks not engaged.
6
I
MPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
P
RODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
I
t must be taken to a special local authority differentiated waste collection centre or
t
o a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
c
onsequences for the environment and health deriving from inappropriate
d
isposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a
c
rossed-out wheeled dustbin.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FP971 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FP971 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info