463570
9
Zoom out
Zoom in
Previous page
1/59
Next page
7
centrifugal juicer (if supplied)
U
se the centrifugal juicer for making juice from firm fruit and vegetables.
a
pusher
b lid
c
pulp remover
d
filter drum
e bowl
f
juicing spout
g
juicer drive adaptor
to use the centrifugal juicer
1
Fit the juicer drive adaptor onto the power unit ƿ push down lightly to
ensure the adaptor is located correctly.
2
Then fit the juicer bowl. Place the handle towards the back and turn clockwise
u
ntil it locks
.
3 Place the pulp remover into the filter drum - ensuring the tabs locate with the
s
lots in the bottom of the drum
.
4
Fit the filter drum
.
5 Place the attachment lid onto the bowl, turn until it locks and the feed tube sits
o
ver the handle Your juicer will not operate if the bowl or lid are
n
ot fitted correctly into the interlock.
6 Place a suitable glass or jug under the juice outlet.
7 Cut the food to fit the feed tube.
8
Select Auto and push down evenly with the pusher - never put your
f
ingers in the feed tube. Process fully before adding more.
After adding the last piece, let the juicer run for a further 30 seconds to
extract all the juice from the filter drum.
safety
Do not use the juicer if the filter is damaged.
The cutting blades on the base of the filter drum are very sharp, take care
when handling and cleaning the drum.
Only use the pusher supplied. Never put your fingers in the feed tube.
Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
important
If the juicer starts to vibrate, switch off and empty the pulp from the drum.
(The juicer vibrates if the pulp becomes unevenly distributed).
Maximum capacity that can be processed at one time is 1Kg of fruit or
vegetables (refer to speed chart).
Some very hard foods may make your juicer slow down or stop. If this
happens switch off and unblock the filter.
Switch off and clear the pulp collector regularly during use.
hints
Before processing remove stones and pips (eg pepper, melon, plum) and
tough skins (eg melon, pineapple). You don’t need to peel or core apples
and pears.
Use firm, fresh fruit and vegetables.
To maximise juice extraction place small quantities at a time in the feed tube
and push down slowly.
Citrus fruit - peel and remove the white pith, otherwise the juice may taste
bitter. For best results use the citrus press.
attachment storage box
Your food processor is supplied with a storage box for your bowl
attachments and discs.
1 Fit the whisk, knife blade, dough tool and discs into the storage box when
not
in use .
2 The storage box is fitted with a safety lock - close the lid and slide the
latch to the left to lock . To open slide the latch to the right .
care & cleaning
A
lways switch off and unplug before cleaning.
H
andle the blades and cutting discs with care - they are extremely sharp.
Some foods may discolour the plastic. This is perfectly normal and won’t
h
arm the plastic or affect the flavour of your food. Rub with a cloth dipped in
v
egetable oil to remove the discolouration.
power unit
W
ipe with a damp cloth, then dry. Ensure that the interlock area is clear of
f
ood debris.
Store excess cord in the storage area at the back of the machine .
detachable drive shaft/juicer drive adaptor
W
ipe with a damp cloth, then dry.
D
o not immerse the drive shaft or adaptor in water.
liquidiser/mill
1 Empty the goblet/jar before unscrewing it from the blade unit.
2
Wash the goblet/jar by hand.
3 Remove and wash the seals.
4 Don’t touch the sharp blades brush them clean using hot soapy water,
t
hen rinse thoroughly under the tap. Don’t immerse the blade unit in
water.
5 Leave to dry upside down.
t
win beater geared whisk
D
etach the beaters from the drive head by gently pulling them free. Wash in
warm soapy water.
Wipe the drive head with a damp cloth, then dry.
Do not immerse the drive head in water.
all other parts
Wash by hand, then dry.
Alternatively they are dishwasher safe and can be washed on the top rack of
your dishwasher. Avoid placing items on the bottom rack directly over the
heating element. A short low temperature (Maximum 50°C) programme is
recommended.
service & customer care
If the cord is damaged it must, for safety reasons, be replaced by Kenwood
or an authorised Kenwood repairer.
If you experience any problems with the operation of the
processor, before calling for assistance refer to the
troubleshooting guide.
If you need help with:
using your appliance or
servicing or repairs
Contact the shop where you bought your appliance.
Designed and engineered by Kenwood in the UK
Made in China
57
5
7
57
57
5
7
57
57
57
57
57
57
6
item suitable for
dishwashing
main, midi & mini bowl, lid, pushers, spatula
liquidiser glass goblet, lid, filler cap
blade unit and seal for liquidiser and mill
glass mill jar
knife blades, dough tool, maxi blend canopy
whisk beaters
whisk drive head
discs
citrus press
centrifugal juicer
detachable drive shaft
juicer drive adaptor
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FP971 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FP971 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info