463567
6
Zoom out
Zoom in
Previous page
1/111
Next page
h
and side.
Use the pulse control for short bursts. The pulse will operate as
long as the control is held in position.
6
Reverse the above procedure to remove the lid, attachments and
bowl.
Always switch off before removing the lid.
important
Y
our processor bowl is not suitable for crushing or grinding
coffee beans, or converting granulated sugar to caster sugar.
When adding almond essence or flavouring to mixtures avoid
c
ontact with the plastic as this may result in permanent marking.
to use your liquidiser
1 Fit the sealing ring into the blade unit - ensuring the seal is
l
ocated correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the goblet onto the blade assembly .
The liquidiser will not work if incorrectly assembled.
3 Put your ingredients into the jug.
4 Fit the lid to the goblet and push down to secure . Fit the filler
cap.
5 Place the liquidiser onto the power unit and turn clockwise to
lock .
6 Select a speed or use the pulse control.
safety
Liquids should be allowed to cool to room
temperature before blending.
Always take care when handling the blade assembly and avoid
touching the cutting edge of the blades when cleaning.
Only operate the liquidiser with the lid in place.
Only use the goblet with the blade assembly supplied.
Never run the liquidiser empty.
To ensure the long life of your liquidiser, do not run it for longer
than 60 seconds.
Smoothie recipes - never blend frozen ingredients that have
formed a solid mass during freezing, break it up before adding to
the goblet.
hints
When making mayonnaise, put all the ingredients, except the oil,
into the liquidiser. Remove the filler cap. Then, with the appliance
running, add the oil slowly through the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need scraping down. If
the mixture is difficult to process, add more liquid.
Ice crushing - operate the pulse in short bursts until crushed to the
desired consistency.
The processing of spices is not recommended as they may
damage the plastic parts.
The appliance will not work if the liquidiser is incorrectly fitted.
To blend dry ingredients - cut into pieces, remove the filler cap,
then with the appliance running, drop the pieces down one by
one. Keep your hand over the opening. For best results empty
regularly.
Don’t use the liquidiser as a storage container. Keep it empty
before and after use.
Never blend more than 1.2 litres - less for frothy liquids like
milkshakes.
to use your mill
U
se the mill for milling herbs, nuts and coffee beans.
1
Put the ingredients into the jar .
2 Fit the sealing ring into the blade unit .
3
Turn the blade unit upside down. Lower it into the jar, blades
d
own.
4 Screw the blade unit onto the jar until finger tight .
5
Place the mill onto the power unit and turn clockwise to lock .
6
Switch onto maximum speed or use the pulse control.
safety
Never fit the blade unit to your food processor without the jar
f
itted.
Never unscrew the jar while the mill is fitted to your appliance.
Do not touch the sharp blades Keep the blade unit away from
c
hildren.
Never remove the mill until the blades have completely stopped.
To ensure the long life of your mill, never run for longer than
30 seconds. Switch off as soon as you have got the right
consistency.
The processing of spices is not recommended as they may
damage the plastic parts.
The appliance will not work if the mill is incorrectly fitted.
Use for dry ingredients only.
hints
Herbs are best milled when clean and dry.
3
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FP270 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FP270 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info