706647

Kenwood FHM155SI kFlex Manual

8
Zoom out
Zoom in
Previous page
1/218
Next page
5
weighing function/countdown timer
Your food processor is fitted with a built in weighing function
to allow ingredients to be weighed straight into the bowl or
blender goblet.
l
The Maximum weighing capacity is 3kg. This is the total
weight of all the ingredients including the weight of the bowl
or goblet.
to use the weighing function
1 Always fit the bowl, detachable drive shaft and attachment
or blender goblet onto the power unit before adding
ingredients.
2 Plug in – the display screen will
remain blank until the speed
control is turned to ‘ON’.
3 Turn to ‘ON’ the display screen
will light up.
4 Press the (kg/lb) button to select
either grams or ounces. The
display will default to kg/g when
first switched on.
l
The unit weighs in 1g increments
and teaspoon/tablespoon
measures are recommended for
weighing small quantities.
5 Check the display shows ‘0’, if not, zero by pressing the
ZERO button. Then weigh the required ingredients straight
into the bowl or goblet. After the weight is displayed, press
the ZERO button and the display will return to ‘0’. Add the
next ingredients and that weight will be displayed. Repeat
until all ingredients are weighed.
l
To zero press the ZERO button once.
6 Fit the lid and select a speed to operate the processor.
l
During operation the display screen will show the count up
time.
l
To swap to the weighing function, turn to the ‘ON’ position
and whilst the timer is paused hold the kg/lb button down
for 2 seconds.
l
If the display is not zeroed and either the ingredients or the
bowl/attachment/lid are removed the display will flash
(----) to represent a minus reading. Press the ZERO button
to reset.
l
The weight of any additional ingredients added down the
feed tube whilst the processor is running will not be shown
on the display screen.
b
weighing tray
A removable weighing tray
is supplied for weighing
ingredients without the
bowl or blender.
To use, place the tray on
top of the power unit and
turn clockwise to secure
in place.
To remove just turn anti-
clockwise and lift off.
Count up timer
l
During operation the display screen will automatically
operate as a count up timer.
l
The timer will count up in seconds to 10 minutes and
will pause whenever the speed control is turned to ‘ON’
position.
l
To reset the timer to zero press the ZERO button.
auto switch off
l
The display screen will turn on whenever the speed control
is in the ‘ON’ position, unless the auto switch off has
activated.
l
The auto switch off will activate if the appliance is left
plugged in without operating for more than 30 minutes. To
re-activate press either the ZERO button or turn the speed
control off ‘O’ and then back to the ‘ON’ position.
important
l
Do not overload by exceeding the maximum weighing
capacity of 3kg. The display will show [o – Ld] if the
weighing function is overloaded.
l
Do not subject the power unit to excessive force as this may
damage the weighing sensor.
l
Always place the processor on a dry flat surface prior to
weighing.
l
Do not move the power unit during operation of the
weighing function.
to use your blender (if supplied)
1 Fit the sealing ring
b
into the blade assembly
bq
- ensuring
the seal is located correctly in the grooved area.
l
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Hold the underside of the blade assembly
bq
and insert the
blades into the goblet - turn anti-clockwise until it is secure
4
.
3 Put your ingredients into the goblet.
4 Fit the lid onto the goblet and turn clockwise
5
until it
clicks. Fit the filler cap.
5 Place the blender onto the power unit by placing the handle
to the right hand side and turn forward
6
until it locks.
l
The blender will not operate if not fitted to the
interlock correctly. Check that the handle is
situated to the right hand front corner.
The blender will not operate if incorrectly
assembled.
6 Select a speed (refer to the recommended speed chart) or
use the pulse control.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FHM155SI kFlex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FHM155SI kFlex in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info