630835
8
Zoom out
Zoom in
Previous page
1/109
Next page
b
efore plugging in
Make sure your electricity supply is the same as the one
s
hown on the underside of your appliance.
T
his appliance conforms to EC directive 2004/108/EC on
Electromagnetic Compatibility and EC regulation no.
1935/2004 of 27/10/2004 on materials intended for contact
w
ith food.
b
efore using for the first time
1 Remove the plastic blade covers from the knife blade. Take
c
are the blades are very sharp. These covers should
b
e discarded as they are to protect the blade during
manufacture and transit only.
2
Wash the parts see ‘care & cleaning’
key
processor
1
power unit
2
bowl with drive shaft
3
detachable drive shaft
4
lid
5
feed tube
6
pushers
7
safety interlocks
8
speed/pulse control
9
power on light
bk
cord storage (at back)
blender
bl
filler cap
bm
lid
bn
goblet
bo
sealing ring
bp
blade unit
bq
base
A - standard attachments
br
knife blade
bs
dough tool
bt
max capacity disc
ck
2mm slicing/grating disc
B - optional attachments
Not all the attachments listed below will be included with your
food processor model. Attachments are dependent upon the
model variant. For more information or to order additional
attachments refer to the “service and customer care” section.
cl
dual whisk (if supplied)
cm
4mm slicing/grating disc (if supplied)
cn
extra fine grater disc (if supplied)
co
French fry disc (if supplied)
cp
folding tool (if supplied)
cq
mini bowl and blade (if supplied)
cr
grinding mill (if supplied)
cs
citrus juicer (if supplied)
ct
juicer extractor (if supplied)
dk
attachment storage box (if supplied)
to use your food processor
1 Fit the bowl to the power unit. Place the handle towards the
right hand side and turn forward
1
until it locks.
2
Fit an attachment over the bowl drive shaft.
Note: Detachable drive shaft
2
should be fitted
when using the discs, mini bowl, whisk, folding
t
ool and citrus juicer.
Always fit the bowl and attachment onto the processor
before adding ingredients.
3
Fit the lid ensuring the top of the drive shaft/tool locates into
the centre of the lid
3
.
The processor will not operate if the bowl or lid
a
re not fitted correctly into the interlock. Check
that the feed tube and bowl handle are situated
to the right hand side.
4
Plug in. The Power On light will come on. Select one of the
following options: -
Speed Control – manually select the required speed (refer to
the recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will
operate for as long as the control is held in position.
5 At the end of processing turn the speed control to the ‘OFF’
position (Align the speed control with the power on light
9
).
Always switch off and unplug before removing the
lid.
important
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FDP613 Multipro Home at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FDP613 Multipro Home in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info