Manual Kenwood FDM78 (page 10 of 121) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

606998

Zoom out

Zoom in

1/121

weighing function (TYPE FDM79 only)

our food processor is fitted with a built in weighing function

to allow ingredients to be weighed straight into the bowl or

lender goblet.

●

he Maximum weighing capacity is 3Kg. This is the total

weight of all the ingredients including the weight of the bowl

r goblet.

to use the weighing function

1 Always fit the bowl, detachable drive shaft and attachment

or blender goblet onto the power unit before adding

ngredients.

2 Plug in – the display screen will

remain blank.

Press the ON/ZERO button once

and the display screen will light

up.

4 Press the (kg/lb) button to select

either grams or ounces. The

display will default to kg/g when

first switched on.

●

The unit weighs in 1g increments

and teaspoon/tablespoon

measures are recommended for

weighing small quantities.

5 Check the display shows ‘0’, if not, zero by pressing the

ON/ZERO button. Then weigh the required ingredients

straight into the bowl or goblet. After the weight is displayed,

press the ON/ZERO button and the display will return to ‘0’.

Add the next ingredients and that weight will be displayed.

Repeat until all ingredients are weighed.

●

If the display is not zeroed and either the ingredients or the

bowl/attachment/lid are removed the display will show

[ - - - -] to represent a minus reading.

To zero press the ON/ZERO button once.

6 Add the lid and select a speed to operate the processor.

●

During operation the display screen will freeze [- - - -] until

the speed control returned to the ‘OFF’ position.

●

After processing the last weight will be displayed on the

screen when the speed control is returned to the ‘OFF’

position. Note: The weight of the lid will be included if the

display is not zeroed before switching on.

●

The weight of any additional ingredients added down the

feed tube whilst the processor is running will not be shown

on the display screen.

weighing tray

A removable weighing tray is

supplied for weighing

ingredients without the bowl or

blender.

To use, place the tray on top of

the power unit. Then follow

steps 2 to 5 under ‘to use the

weighing function’.

To remove, just lift the tray off.

auto switch off

●

The display screen will turn off automatically if the same

weight reading is shown after 5 minutes.

●

The display screen can be turned off manually by pressing

and holding down the ON/ZERO button for a few seconds.

mportant

●

Do not overload by exceeding the maximum weighing

apacity of 3Kg. The display will show [0 – Ld] if the

weighing function is overloaded.

●

o not subject the power unit to excessive force as this may

damage the weighing sensor.

●

lways place the processor on a dry flat surface prior to

eighing.

●

Do not move the power unit during operation of the

eighing function.

to use your thermoresist blender

Fit the sealing ring

nto the blade unit

ensuring the

seal is located correctly in the grooved area.

●

Leaking will occur if the seal is damaged or

ncorrectly fitted.

Clip the blade unit

nto the base

3 Screw the blade assembly onto the goblet - ensuring the

blade assembly is fully tightened

. Refer to the graphics

on the underside of the blade unit as follows:

- unlocked position

- locked position

The blender will not work if incorrectly

assembled.

4 Put your ingredients into the goblet.

5 Fit the lid to the goblet and push down to secure

. Fit the

filler cap.

6 Place the blender onto the power unit, and turn clockwise

to lock.

●

The appliance will not operate if the blender is

incorrectly fitted to the interlock.

7 Select a speed (refer to the recommended speed chart) or

use the pulse control.

hints

●

When making mayonnaise, put all the ingredients, except

the oil, into the blender. Remove the filler cap. Then, with the

appliance running, add the oil slowly through the hole in the

lid.

●

Thick mixtures, e.g. pâtés and dips, may need scraping

down. If the mixture is difficult to process, add more liquid.

●

Ice crushing - operate the pulse in short bursts until crushed to

the desired consistency.

●

The processing of spices is not recommended as they may

damage the plastic parts.

●

The appliance will not work if the blender is incorrectly fitted.

●

To blend dry ingredients - cut into pieces, remove the filler

cap, then with the appliance running, drop the pieces down

one by one. Keep your hand over the opening. For best

results empty regularly.

●

Don’t use the blender as a storage container. Keep it empty

before and after use.

●

Never blend more than 1.5 litres (53 fl oz) - less for frothy

liquids like milkshakes.

Hi, the red plastic latchet under the pusher from Kenwood FDM78 mixer fell off and a tiny spring as well. I have those pieces, but I don’t know how to piece them back in together. Can someone post a picture, please. I can attach picture of the pieces. They do the click when the mixer is in the right position. Submitted on 25-10-2020 at 09:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FDM78 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood FDM78 Manual

Product: