Manual Kenwood FDM303 Multipro Compact (page 8 of 203) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

706655

Zoom out

Zoom in

1/203

to use your food processor

1 Fit the detachable drive shaft onto the power unit 1.

2 Then fit the bowl by aligning the on the bowl with the

on the power unit, turn clockwise 2 until it locks .

3 Fit an attachment over the bowl drive shaft.

l Always fit the bowl and attachment onto the processor

before adding ingredients.

4 Fit the lid 3 - ensuring the top of the drive shaft/tool locates

into the centre of the lid.

l Do not use the lid to operate the processor,

always use the on/off speed control.

5 Plug in, switch on and select a speed. (Refer to the

recommended speed chart).

l The processor will not operate if the bowl or lid

are not fitted correctly into the interlock. Check

that the feed tube and bowl handle are situated

to the right front hand corner.

l Use the pulse (P) for short bursts. The pulse will operate for

as long as the control is held in position.

6 Reverse the above procedure to remove the lid, attachments

and bowl.

l Always switch off and unplug before removing

the lid.

important

l Your processor is not suitable for crushing or grinding coffee

beans, or converting granulated sugar to caster sugar.

l When adding almond essence or flavouring to mixtures

avoid contact with the plastic as this may result in

permanent marking.

A Plastic blender (if supplied)

to use your blender

1 Fit the sealing ring  into the blade assembly  - ensuring

the seal is located correctly in the grooved area.

l Leaking will occur if the seal is damaged or

incorrectly fitted.

2 Hold the underside of the blade assembly  and insert the

blades into the goblet - turn anti-clockwise until it is secure

4. Refer to the graphics on the underside of the blade

assembly as follows:

- unlocked position

- locked position

The blender will not operate if incorrectly

assembled.

3 Put your ingredients into the goblet.

4 Fit the lid onto the goblet and turn clockwise 5 until it

clicks. Fit the filler cap.

5 Place the blender onto the power unit, align the on the

blender with the on the power unit and turn clockwise 6

to lock .

l The appliance will not operate if the blender is

incorrectly fitted to the interlock.

6 Select a speed (refer to the recommended speed chart) or

use the pulse control.

B Glass blender (if supplied)

to use your blender

1 Fit the sealing ring  into the blade unit  - ensuring the

seal is located correctly in the grooved area.

l Leaking will occur if the seal is damaged or

incorrectly fitted.

2 Screw the goblet onto the blade assembly 4. Refer to the

graphics on the underside of the blade unit as follows:

- unlocked position

- locked position

The blender will not operate if incorrectly

assembled.

3 Put your ingredients into the goblet.

4 Fit the lid to the goblet and push down to secure 5. Fit the

filler cap.

5 Place the blender onto the power unit, align the on the

blender with the on the power unit and turn clockwise 6

to lock .

l The appliance will not operate if the blender is

incorrectly fitted to the interlock.

6 Select a speed (refer to the recommended speed chart) or

use the pulse control.

multi mill (if supplied)

Use the multi mill for processing nuts, coffee beans and

purées.

1Put the ingredients into the jar c.

2Fit the sealing ring co into the blade assembly cp.

3Turn the blade assembly upside down. Lower it into the jar,

blades down.

4Screw the blade assembly onto the jar until finger tight

7. Refer to the graphics on the underside of the blade

assembly as follows:

- unlocked position

- locked position

5Place the multi mill onto the power unit, align the on

the mini multi mill with the on the power unit and turn

clockwise 8 to lock .

6Switch onto maximum speed or use the pulse control.

grinding mill (if supplied)

Use the grinding mill for processing dry ingredients such as

coffee beans and for grinding spices such as:-

Black peppercorns, cardamom seeds, cumin seeds,

coriander seeds, fennel seeds, fresh ginger root, garlic

cloves and fresh chillies.

to use your grinding mill.

1 Place your ingredients into the blade assembly cr.

2 Fit the lid cq and turn clockwise to lock 9.

3 Place the mill onto the power unit and turn clockwise to lock

bk.

4 Select a speed or use the pulse (P).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FDM303 Multipro Compact in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 26,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood FDM303 Multipro Compact Manual

Product: