630926
6
Zoom out
Zoom in
Previous page
1/184
Next page
4
Fit the lid
bm
a
nd turn clockwise to
l
ock
6
.
5 Place a bowl under the food outlet
bo
.
6
Cut the food to fit the feed tube.
7 Slide the on/off lever
bn
and lock in
the ON position
7
.
8
Push down evenly with the pusher
never put your fingers in
the feed tube.
Reverse the above procedure to
dismantle the unit.
Always unplug the power
unit before removing the lid.
important
If the food is not exiting the
food outlet, switch off and
check that food is not
clogging under the disc.
Clear any trapped food
before continuing to
process.
Do not run the direct serve
attachment continuously for
longer than 60 seconds.
Leave to cool for 2 minutes
in between each 60 second
operation.
hints
Always use fresh ingredients
Don’t cut food up too small. Fill the
width of the large feed tube fairly
full. This prevents the food from
slipping sideways during
processing.
There will always be a small
amount of waste left on the disc
after processing.
care and cleaning
Always switch off and unplug
before cleaning.
Handle the blades and disc
with care - they are
extremely sharp.
Some foods may discolour the
plastic. This is perfectly normal and
won’t harm the plastic or affect the
flavour of your food. Rubbing with
a cloth dipped in vegetable oil may
help remove the discolouration.
p
ower unit
Wipe with a damp cloth, then dry.
D
o not immerse the power unit in
w
ater.
Push excess cord into the base of
t
he power unit.
f
ood chopper - lid/bowl/knife
b
lade
Always separate the upper knife
blade from the lower knife blade
before cleaning. Take care the
blades are very sharp.
Wash parts by hand, then dry.
The parts are unsuitable for use in
a Steam Steriliser. Instead use a
sterilising solution in accordance
with the sterilising solutions
manufacturer’s instructions.
direct serve attachment
Dismantle the attachment fully
before cleaning.
For easier cleaning always wash
the parts immediately after use.
Handle the cutting disc with care –
it is extremely sharp.
Wash all the parts by hand, then
dry thoroughly.
If the direct serve adaptor is
immersed in water, ensure that all
the water has drained out before
reassembling the attachment.
Dishwasher Safe Parts
Dishwasher safe parts can be
washed on the top rack of your
dishwasher.
A short low temperature (Maximum
50°C) programme is
recommended.
6
item suitable for
dishwashing
Bowl
Food chopper lid
Direct serve lid
Knife blades
Disc
Direct serve adaptor
Pusher
Spatula
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FDM10 - CH250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FDM10 - CH250 in the language / languages: All languages as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info