683035
18
Zoom out
Zoom in
Previous page
1/25
Next page
Configuring the Settings
Driving support settings
Forward collision warning ON/OFF*
This function detects the distance between you and the vehicle in front, and
sounds a warning if the distance is not safe in order to prevent a collision with
the vehicle in front. This functions at speeds of approximately 30 km/h and higher.
Lane departure warning ON/OFF*
This function detects the lane in which you are driving and sounds a warning if you
veer out of that lane. This functions at speeds of approximately 60 km/h and higher.
Departure delay warning ON/OFF*
This function sounds a warning if, while you are stopped, the vehicle in front of
you has taken off and your departure is too slow. With this function, a warning is
also sounded if you are backing up.
Detection range Adjust the horizon, position of the front tip of the engine hood, etc., before using
the driving support functions. ( P. 17)
Mounting height 1.2 m*/1.35 m/2 m
Set the height from the road surface to the position at which the camera is
mounted. ( P. 17)
System settings
Date/time Automatic*/Manual
Set whether to record the date and time automatically or manually. ( P. 36)
You must set the Time Zone
Daylight saving time OFF*/+1 hr./+30 min Set daylight saving time.
Notification volume The volume of the notification sound can be set in 6 steps (mute to maximum).
The notification sound is the sound issued as guidance during event recording,
when operating buttons, etc.
Playback volume
Set the volume of the sound when playing recorded files in 6 steps (mute to
maximum).
Monitor Time settings 10 sec.*/1 min./3 min.
Set the time after which the monitor screen switches to the power-saving mode
during recording.
Operation settings
Always on*/OFF/Dim
Set the monitor screen's power-saving operation during recording. When the
MENU/OK button is pressed, the power-saving operation is temporarily canceled.
Mounting support tool Level
Use this to check whether the camera is level.
Satellite reception level
This displays the positioning satellite reception strength screen.
Select units km/h/mph*
Switch to kilometer or mile display.
Factory reset Restores the settings to the values set upon purchase.
When executed, the power turns off then back on and the setup screen appears.
Follow the instructions on the screen to configure the settings.
Setup Configure the settings related to installation of the camera in a specific order.
Update system Update the camera's firmware.
System version Display the camera's firmware version.
About updating the system
This function updates the camera's system firmware. For information and instructions on
updating, see the Kenwood website. http://www.kenwood.com/cs/ce/
SD card menu
SD card information (Slot 1) Display the information screen for the SD card in slot 1.
SD card information (Slot 2) Display the information screen for the SD card in slot 2.
Format SD card (Slot 1) Formats the SD card in slot 1, deleting all the files on the card.
Format SD card (Slot 2) Formats the SD card in slot 2, deleting all the files on the card.
* Factory default settings
3534
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-830 in the language / languages: English as an attachment in your email.

The manual is 12,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-830

Kenwood DRV-830 User Manual - German - 49 pages

Kenwood DRV-830 User Manual - Dutch - 52 pages

Kenwood DRV-830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info