683035
17
Zoom out
Zoom in
Previous page
1/25
Next page
Configuring the Settings
MENU
Playback
Continuous REC (Slot 1) Select the folder and play the desired file. ( P. 26)
It is also possible to protect or delete the file during file playback. ( P. 28)
Continuous REC (Slot 2)
Manual REC
Event REC
Parking REC
Still images
Parking recording settings
To use the parking recording function, the power must be connected with the CA-DR100 (optional
accessory). ( P. 14)
Recording time OFF (parking recording not performed)/10 sec*/20 sec /30 sec
Set the time for recording after an impact is detected.
Overwrite ON*/OFF
Set whether or not to overwrite old files after the maximum number of recording
files has been reached.
Detecting sensitivity 1 (Low Sensitivity)/2/3*/4/5 (High Sensitivity)
Set the sensitivity for detection of impacts to the parked vehicle.
Exit time after ACC OFF OFF*/30 sec/1 min/3 min
Set the time for which parking recording will be disabled after the engine key
is turned off.
Entry time before ACC ON OFF*/30 sec/1 min/3 min
Set the time for which parking recording will be disabled before the engine key
is turned on.
* Factory default settings
Recording settings
Audio recording ON*/OFF
Set whether or not to record the sound from the microphone when recording.
Continuous recording file
length
1 min*/3 min/5 min
Set the recording time for continuous recording. The recordings are split according
to the recording time set here.
For low frame rate recordings, the file length is 10 minutes, regardless of the
value set here.
Manual recording time 15 sec*/30 sec/1 min
Set the time for recording after manual recording is started. The recording time
before the [REC] button is set is fixed to 10 seconds.
Event recording time 15 sec.*/30 sec./1 min.
Set the time for recording after an impact is detected. The recording time before
an impact to the vehicle is detected is fixed to 10 seconds.
Overwrite (manual) ON/OFF*
Set whether or not to overwrite old files after the maximum number of recording
files has been reached.
Overwrite (event) ON/OFF*
Set whether or not to overwrite old files after the maximum number of recording
files has been reached.
Resolution 2560×1440 (HDR)/2304×1296 (HDR)
/1920×1080 (HDR)*/1280×720 (HDR)
Sets the resolution for recording.
Recording mode Normal*/Low frame rate
Select a recording mode. Selecting low frame rate recording increases the recording
time to more than usual.
Low frame rate 9 fps*/3 fps
Set the image update frequency during low frame rate recording. The smaller the
value, the longer the recording time.
Detecting sensitivity (event) 1 (Low Sensitivity) /2/3*/4/5 (High Sensitivity)
Set the sensitivity for detecting impacts to the vehicle.
Automatic still image capture Capture interval
1 min./5 min.*/15 min./30 min.
Set the interval for capturing images with the automatic still image capture function.
Number of captured images
10/30*/50
Set the number of images to be captured with the automatic still image capture
function.
Information stamps ON*/OFF
Set whether or not to record subtitles (date and time, position information, etc.).
* Factory default settings
3332
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-830 in the language / languages: English as an attachment in your email.

The manual is 12,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-830

Kenwood DRV-830 User Manual - German - 49 pages

Kenwood DRV-830 User Manual - Dutch - 52 pages

Kenwood DRV-830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info