683035
6
Zoom out
Zoom in
Previous page
1/25
Next page
Precautions for Use
Precautions for installation
z
Install the device in a position where it will not block the front view of the driver (position where
hidden by the rear-view mirror).
z
Install the device so that it is within the wiping range of the wiper.
z
Install the device in a position where it will not interfere with the movement of the rear-view
mirror.
z
Take care not to install the device over the vehicle inspection sticker or other sticker.
z
Take care not to install the device where it will interfere with driving or airbag operation.
z
When installing the device in a vehicle equipped with a driving support system, check the
instruction manual of the vehicle and then select an installation location that will not interfere
with the driving support system.
z
If the device is installed incorrectly, event recording or parked recording may not work correctly.
Refer to “How to Install” for the loosening of fixing knob, installation orientation, installation angle,
and other information and then install the device correctly.
( P. 12)
z
Do not install the device near a digital terrestrial television antenna or an electrical component.
Doing so may reduce television receiver sensitivity or cause flickering and noise.
z
Use a commercially available cleaning cloth or the like to wipe off all dirt and grease on the
mounting surface and then fix the mount base in place. If the device is re-affixed or mounted
using, for example, general-purpose double-sided tape, the adhesion strength may weaken and
cause the device to fall.
z
After mounting the device, leave it for 24 hours before use to enable the mounting strength of
the mount bracket to improve. Failing to do so may result in the adhesion of the mount bracket
becoming weak and the device falling.
z
Fix the cord in place with tape or the like so that it does not interfere with driving.
Precautions for use
z
Do not block the camera lens, get dirt on it, or place a reflective object near it.
z
When LED traffic lights are recorded, video in which they appear to be flickering or flashing
may be recorded. JVC KENWOOD assumes no responsibility with regard to the distinguishing
or recording of traffic lights.
z
If coating is used on the windshield of the vehicle, recording quality may be affected.
z
There is no guarantee that the device can record video in all conditions.
Cleaning the device
z
When the device is dirty, wipe it with a dry silicone cloth or other soft cloth. If the device is very
dirty, remove the dirt with a cloth with neutral cleaner on it then wipe off the cleaner. Wiping
the device with a hard cloth or using a volatile substance such as thinner or alcohol may cause
scratches, deformation, deterioration or other damage.
z
When the lens is dirty, gently wipe it with a soft cloth dampened with water. Rubbing the lens
strongly with a dry cloth may cause scratches.
If you notice a problem with the device
If you notice a problem with the device, first refer to Troubleshooting P. 41and check whether
there is a way to resolve the problem.
If the device does not return to normal, turn off the power of the device and then contact your
dealer or nearest JVC KENWOOD service center.
1110
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-830 in the language / languages: English as an attachment in your email.

The manual is 12,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-830

Kenwood DRV-830 User Manual - German - 49 pages

Kenwood DRV-830 User Manual - Dutch - 52 pages

Kenwood DRV-830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info