672812
24
Zoom out
Zoom in
Previous page
1/36
Next page
24
Installation
Ñ Installation procedure
1) To prevent a short circuit, remove the key from the ignition
and disconnect the ¤ terminal of the battery.
2) Make the proper input and output wire connections for
each unit.
3) Connect the wire on the wiring harness.
4) Take Connector B on the wiring harness and connect it to
the speaker connector in your vehicle.
5) Take Connector A on the wiring harness and connect it to
the external power connector on your vehicle.
6) Connect the wiring harness connector to the unit.
7) Install the unit in your car.
8) Reconnect the ¤ terminal of the battery.
9) Perform the Initial Setup. See Initial settings (P.5).
Installing the unit
Ñ DNX8160DABS, DNX5160DABS, DNX5160BTS,
DNX3160BT
Bend the tabs of the
mounting sleeve with
a screwdriver or similar
utensil and attach it in
place.
Ñ DNX716WDABS
Screw (M5x6mm) (Sold
separately)
Screw (M5x6mm) (Sold separately)
Car Bracket
Ñ DNX516DABS
Screws (included in
genuine audio unit)
NOTE
Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (eg, the sound may
skip).
Ñ Trim plate (DNX8160DABS, DNX5160DABS,
DNX5160BTS, DNX3160BT)
1) Attach accessory 5 to the unit.
5
Ñ Microphone unit
1) Check the installation position of the microphone
(accessory 3).
2) Clean the installation surface.
3) Remove the separator of the microphone (accessory 3),
and stick the microphone to the place shown below.
4) Wire the microphone cable up to the unit with it secured
at several positions using tape or other desired method.
5) Adjust the direction of the microphone (accessory 3) to
the driver.
3
Fix a cable with a commercial item of tape.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DNX716WDABS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DNX716WDABS in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DNX716WDABS

Kenwood DNX716WDABS User Manual - English - 22 pages

Kenwood DNX716WDABS User Manual - German - 125 pages

Kenwood DNX716WDABS User Manual - German - 26 pages

Kenwood DNX716WDABS Quick start guide - German, Dutch - 96 pages

Kenwood DNX716WDABS User Manual - Dutch - 24 pages

Kenwood DNX716WDABS User Manual - Dutch - 125 pages

Kenwood DNX716WDABS Quick start guide - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info