672812
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
English |
InstallationInstallation
Before Installation
Before installation of this unit, please note the following
precautions.
#WARNINGS
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
Do not cut out the fuse from the ignition wire (red) and the
battery wire (yellow). The power supply must be connected
to the wires via the fuse.
#CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and shortly
after the use of the unit. Metal part such as the heat sink
and enclosure become hot.
NOTE
Mounting and wiring this product requires skills and
experience. For best safety, leave the mounting and wiring
work to professionals.
Ma
ke sure to ground the unit to a negative 12V DC power
supply.
Do n
ot install the unit in a spot exposed to direct sunlight or
excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Do n
ot use your own screws. Use only the screws provided. If
you use the wrong screws, you could damage the unit.
If t
he power is not turned ON (“There is an error in the speaker
wiring. Please check the connections.” is displayed), the
speaker wire may have a short-circuit or touched the chassis
of the vehicle and the protection function may have been
activated. Therefore, the speaker wire should be checked.
If y
our car’s ignition does not have an ACC position, connect
the ignition wires to a power source that can be turned on
and off with the ignition key. If you connect the ignition wire
to a power source with a constant voltage supply, such as with
battery wires, the battery may be drained.
If t
he console has a lid, make sure to install the unit so that the
front panel will not hit the lid when closing and opening.
If t
he fuse blows, first make sure the wires aren’t touching to
cause a short circuit, then replace the old fuse with one with
the same rating.
In
sulate unconnected wires with vinyl tape or other similar
material. To prevent a short circuit, do not remove the caps on
the ends of the unconnected wires or the terminals.
Co
nnect the speaker wires correctly to the terminals to which
they correspond. The unit may be damaged or fail to work if
you share the ¤ wires or ground them to any metal part in
the car.
Wh
en only two speakers are being connected to the system,
connect the connectors either to both the front output
terminals or to both the rear output terminals (do not mix front
and rear). For example, if you connect the ¢ connector of the
left speaker to a front output terminal, do not connect the ¤
connector to a rear output terminal.
Af
ter the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Mo
unt the unit so that the mounting angle is 30° or less.
Th
is unit has the cooling fan to decrease the internal
temperature. Do not mount the unit in a place where the
cooling fan of the unit is blocked. Blocking these openings
will inhibit the cooling of the internal temperature and result
in malfunction.
Cooling fan
Do not press hard on the panel surface when installing the unit
to the vehicle. Otherwise scars, damage, or failure may result.
Reception may drop if there are metal objects near the
Bluetooth antenna.
Bluetooth antenna unit
DNX8160DABS DNX716WDABS DNX516DABS
DNX5160DABS/
DNX5160BTS/
DNX3160BT
Ñ Supplied accessories for installation
1
x1
2
[1]
(1 m)
[2]
x1
3
(3 m)
x1
4
[3]
x2
5
[3]
x1
6
(3.5 m)
x1
7
x1
8
[4]
x1
[1]
DNX8160DABS, DNX716WDABS, DNX5160DABS,
DNX516DABS, DNX5160BTS only
[2]
DNX3160BT only
[3]
DNX8160DABS, DNX5160DABS, DNX5160BTS, DNX3160BT
only
[4]
DNX8160DABS only
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DNX716WDABS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DNX716WDABS in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DNX716WDABS

Kenwood DNX716WDABS User Manual - English - 22 pages

Kenwood DNX716WDABS User Manual - German - 125 pages

Kenwood DNX716WDABS User Manual - German - 26 pages

Kenwood DNX716WDABS Quick start guide - German, Dutch - 96 pages

Kenwood DNX716WDABS User Manual - Dutch - 24 pages

Kenwood DNX716WDABS User Manual - Dutch - 125 pages

Kenwood DNX716WDABS Quick start guide - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info