666927
10
Zoom out
Zoom in
Previous page
1/28
Next page
CT-2050/203/KXF-W6010/W4010 (En/M)
10
Playback (recording) preparation
2
Select the tape transport direction.
1
Load a cassette tape in deck A or B.
Preparation for playback (recording)
Before playback (recording)
Normal position TYPE
High position TYPE
Metal position (playback only) TYPE
Deck B: Play-
back/recording
available.
BA
To play (record)
tape side A.
÷ Be sure to remove tape slack before insertion.
÷ The type of tape, that is, the Normal, High position or Metal position
(playback only) is selected automatically.
÷ This unit cannot record sound on a Metal tape.
÷ Be sure to close the cassette holder securely by pushing it.
Feed the tape section which cannot be
played or recorded onto in the forward
direction.
÷ Select the Dolby NR mode according to the tape recording status.
Deck A:
Playback only. (CT-203/
KXF-W4010 only)
Playback/recording avail-
able. (CT-2050/KXF-W6010
only)
To play (record)
tape side B.
The 2 and 3 indicators show the direction the tape is transported
during recording or playback. The direction used when the tape is
last stopped is held in memory even after this unit has been turned
OFF, and the tape transport starts in the indicated direction when
the unit is started automatically by a timer, etc. To change the tape
transport direction, press the play key for the opposite direction and
immediately press the stop (7) key.
Tape transport direction indicators
Deck B direction indicators.Deck A direction indicators.
Each press switches the indication.
1 [ :Double-side playback (recording) which stops tape
stops after having played (or recorded) both sides.
2 :Playback is endless, but recording stops after having
recorded both sides.
3 :One-way playback (recording) which stops tape af-
ter having played (or recorded) a single side.
Each press switches the indication.
1 DOLBY NR “OFF” (extinguished): Dolby NR is not used.
2 DOLBY NR “B”: Noise reduction of the ordinary type.
3 DOLBY NR “C”: Noise reduction with higher performance.
: Keys and control used in the operations described on this page.
0
REV.MODE
DOLBY NR
237
237
1
Press the play (2 or 3) key.
3
Determine the playback (recording) condition.
2
Press the stop (7) key.
1
Select the playback (recording) mode.
2
Select the Dolby NR mode.
1
Press the eject (0) key.
2
Insert a tape and close the cassette holder.
POWER
-ON OFF
TIMER
REC OFF PLAY
2
Set the POWER switch to ON.
1
Set the TIMER switch to OFF.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CT-2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CT-2050 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info