666927
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
CT-2050/203/KXF-W6010/W4010 (En/M)
Controls and indicators
1 Deck A
This deck is used exclusively for play-
back. (CT-203/KXF-W4010 only)
This deck is capable of both playback
and recording. (CT-2050/KXF-W6010
only)
2 Deck A eject (0) key 0
Press to open the cassette holder of
deck A.
3 Deck B eject (0) key 0
Press to open the cassette holder of
deck B.
4 Deck B
This deck is capable of both playback
and recording.
5 Deck A operation keys 0~!
1 :Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡ :Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
2, 3 :Play keys
7 :Stop key (Stop)
6 POWER switch 0
Press to turn this unit ON and OFF.
7 PHONES jack !
Connect stereo headphones (optional)
here.
8 TIMER switch £
This switch is used in setting of timer
playback and timer recording.
9 MODE key ^
Press to change the recording
level,balance,or bias settings.
0 Deck B operation keys 0~!
2, 3 : Play keys
7 :Stop key (Stop)
1 :Rewind key (for fast winding of
tape toward the left reel seen
from you)
¡ :Fast Forward key (for fast wind-
ing of tape toward the right reel
seen from you)
PAUSE (
8) key !
:Press to let tape transport pause
temporarily.
REC/ARM (
) key ^
:Press in stop mode to start re-
cording or press in record mode
to let the recording pause after
leaving a non-recorded blank of
4 seconds.
! Deck A PAUSE (
8) key (CT-2050/
KXF-W6010 only) !
Press to let tape transport pause tem-
porarily.
@ Deck A REC/ARM (
) key (CT-2050/
KXF-W6010 only) ^
Press in stop mode to start recording or
press in record mode to let the record-
ing pause after leaving a non-recorded
blank of 4 seconds.
# RESET A key !
Press to reset the tape counter of deck
A to “0000”.
$ DOLBY NR key 0
Press to switch the Dolby Noise Reduc-
tion mode to B = C = OFF. This makes
it possible to use the Dolby NR effect in
recording and playback.
% REV. MODE key 0
Press to change the tape transport di-
rection.
^ RELAY REC key (CT-2050/KXF-W6010
only) (
Press to perform continuous recording
from deck A to deck B.
& DUBB. keys (NORM./HIGH) (CT-2050/
KXF-W6010 only) )
DUBBING keys (NORMAL/HIGH) (CT-
203/KXF-W4010 only) )
Press to start tape dubbing.
NORM./NORMAL
: Dubbing at the normal
speed.
HIGH : Dubbing at a high speed.
* MPX FILTER key &
Press to reduce beat noise when record-
ing FM broadcasts.
( CCRS key
Press to start recording after automatic
setting of the optimum CD recording
level and optimum tape recording bias.
) AUTO BIAS key ^
When this key is pressed, the bias level
appropriate for the tape is set automati-
cally for recording.
¡ RESET B key
Press to reset the tape counter of deck
B to “0000”.
REC LEVEL/BAL./BIAS knob (CT-
2050/KXF-W6010 only) ^
Adjust this before recording.
£ REC LEVEL/BAL. knob (CT-203/KXF-
W4010 only) ^
Adjust this before recording.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CT-2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CT-2050 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info