649655
34
Zoom out
Zoom in
Previous page
1/40
Next page
34
CONNECTION OF THE POWER
SUPPLY CABLE
Connecting the power cord must be
entrusted to skilled personnel in accor-
dance with the instructions supplied
by the manufacturer and in compliance
with established safety standards.
To connect the feeder cable to the cooker it
is necessary to:
Remove the two screws that hold
shield “Abehind the cooker (g. 10.1).
Open completely the cable clamp “D”.
Fitted with a 6-pole terminal block, po-
sition the U bolts onto terminal block
B (g. 10.1) according to the dia-
grams in gs. 10.2 - 10.3.
Feed the supply cable through the ca-
ble clamp “D”. The supply cable must
be of a suitable size for the current re-
quirements of the appliance; see the
section “Feeder cable section”.
Connect the phase, neutral and earth
wires to terminal “B” according to gu-
res 10.2 and 10.3.
Pull the feeder cable and block it with
the cable clamp “D”.
Re-mount shield “A”.
NOTE: Earth cable must be 3 cm longer
than neutral and live cables.
FEEDER CABLE SECTION
TYPE H05RR-F or H05VV-F
230 V ac 3 x 6 mm
2
(**)
400 V 3N ac 5 x 2,5 mm
2
(**)
400 V 2N ac 4 x 4 mm
2
(**)
(**) Connection with wall box connection.
Diversity factor applied.
A diversity factor may be applied to the
total loading of the appliance only by a
suitably qualied person.
A
D
B
Fig. 10.1
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CK 408-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CK 408-1 in the language / languages: English as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info