649655
33
Zoom out
Zoom in
Previous page
1/40
Next page
33
10 - ELECTRICAL INSTALLATION
Before effecting any intervention on
the electrical parts of the appliance, the
connection to the network must be in-
terrupted.
IMPORTANT: The cooker must be in-
stalled in accordance with the manu-
facturers instructions.
Incorrect installation, for which the
manufacturer accepts no responsibili-
ty, may cause damage to persons, ani-
mals and things.
GENERAL
Connection to the mains must be car-
ried out by a qualied technician in ac-
cordance with current regulations.
The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in the
rating plate and that the electrical ca-
ble sections can withstand the load
specied on the plate.
The cooker can be connected directly
to the mains placing an omnipolar
switch with minimum opening between
the contacts of 3 mm between the ap-
pliance and the mains.
The power supply cable must not
touch any hot parts and must be posi-
tioned so that it does not exceed 75°C
at any point.
Once the cooker has been installed,
the switch must always be accessible.
N.B. For connection to the mains, do
not use adapters, reducers or branching
devices as they can cause overheating
and burning.
If the installation requires alterations to the
domestic electrical system, call an expert.
He should also check that the domestic
electrical system is suitable for the power
absorbed by the appliance.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all respon-
sibility for any inconvenience resul-
ting from the inobservance of this con-
dition.
IMPORTANT: This cooker must be con-
nected to a suitable double pole control
unit adjacent to the cooker.
No diversity can be applied to this con-
trol unit.
WARNING!
This appliance must be earthed.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood CK 408-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CK 408-1 in the language / languages: English as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info