Manual Kenwood CK 405 G (page 38 of 48) (English)

649653

Zoom out

Zoom in

1/48

OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF THE

INJECTORS OF THE OVEN AND GRILL BURNERS

Some models are provided with a set of injectors for the various types of gas.

If the injectors are not supplied they can be obtained from the “Service Centre”.

Select the injectors to be replaced according to the “Table for the choice of the injectors”

(for the gas category check the data label attached on the appliance).

The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of

each injector.

OVEN BURNER (Left and right ovens)

• Lift and remove the lower panel inside the oven.

• Unscrew and remove the burner securing screw “A” (g. 10.7).

• Withdraw the burner as shown in gure 6.4b and rest it inside the oven. Take care not

to damage the safety valve probe and the electric ignition electrode.

• Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in g. 10.8)

and replace it with a new one selected in accordance with the “Table for the choice of

the injectors”.

• Regulate the air supply to the oven burner as indicated in the section “REGULATION

OF AIR SUPPLY TO OVEN AND GRILL BURNERS”; then replace the burner repeating

the above steps in reverse order.

 IMPORTANT: Check the correct operation of the safety valve and the electric

ignition.

Fig. 10.7

Fig. 10.8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CK 405 G in the language / languages: English as an attachment in your email.

The manual is 10,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood CK 405 G Manual

Product: