Manual Kenwood CK 405 G (page 36 of 48) (English)

649653

Zoom out

Zoom in

1/48

REPLACEMENT OF THE

INJECTORS OF THE TOP BURNERS

If the injectors are not supplied they can

be obtained from the

After-Sales Service.

Select the injectors to be replaced

according to the “Table for the choice of the

injectors”.

To replace the injectors proceed as follows:

• Remove pan supports and burners

from the cooktop.

• Using a wrench, substitute the nozzle

injectors “J” (gs. 10.4, 10.5) with

those most suitable for the kind of gas

for which it is to be used.

The burners are conceived in such a

way so as not to require the regulation

of the primary air.

ADJUSTING OF THE MINIMUM OF

THE TOP BURNERS

In the minimum position the ame must

have a length of about 4 mm and must

remain lit even with a quick turn from the

maximum position to that of minimum.

The ame adjustment is done in the

following way:

• Turn on the burner.

• Turn the tap to the MINIMUM position.

• Take off the knob.

• With a thin screwdriver turn the screw

“F” until adjustment is correct (g.

10.6).

Normally for LPG, tighten up the

regulation screw.

CONVERSION TO NATURAL GAS OR TO LPG

Fig. 10.4

Triple-ring burner

Fig. 10.6

Fig. 10.5

Auxiliary,

Semi-rapid and

Rapid burners

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CK 405 G in the language / languages: English as an attachment in your email.

The manual is 10,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood CK 405 G Manual

Product: