Manual Kenwood CH257 - FDM10 (page 4 of 150) (All languages)

630911

Zoom out

Zoom in

1/150

efore plugging in

●

Make sure your electricity supply is

he same as the one shown on the

nderside of the appliance.

●

his appliance conforms to EC

directive 2004/108/EC on

lectromagnetic Compatibility and

C regulation no. 1935/2004 of

27/10/2004 on materials intended

for contact with food.

before using for the first

time

Wash the parts: see ‘cleaning’.

key

bowl

cord storage

power unit

‘safety’ interlock

spatula

lid

speed selector

oil feeder cup

upper knife blade

lower knife blade

to use your food

chopper

The knife blade unit comes in 2

parts, a lower and an upper blade.

●

For coarser chopping use the

lower blade on its own.

●

For finer chopping or pureeing use

both blades together. This will also

give a faster result. To use both

blades fit the upper blade onto the

lower blade and turn anti-

clockwise to locate in place

Take care as the blades are sharp.

Note: After processing food, the

upper blade may disengage from

the lower blade. This is normal as

the blade assembly is designed to

be loose fitting to ease separation

after use.

1 Fit the bowl

onto the power

unit, then turn clockwise to lock

into place

2 Fit the blade assembly into the

bowl.

●

lways fit the bowl and blade

assembly onto the food chopper

efore adding ingredients.

Cut the food into suitably sized

pieces and place in the bowl.

arger pieces of food should be

ut into approximately 1 to 2 cm

pieces.

Fit the lid and turn clockwise to

ock into place

5 Connect to the power supply and

press down on the speed selector

to select the desired speed

●

Press the speed selector lightly to

obtain speed 1.

●

Press the speed selector firmly to

obtain speed 2.

●

Alternatively the speed selector

may be pressed down for short

periods of time to produce a

pulsing action. This can be used to

avoid over processing food.

6 Operate the food chopper until the

desired result is achieved.

7 Reverse the above procedure to

dismantle the unit.

●

Always unplug the power

unit before removing the lid.

important

●

If preparing food for babies or

young children, always check that

the ingredients are thoroughly

blended before feeding.

●

Do not run the food chopper

continuously for longer than

60 seconds. Leave to cool

for 2 minutes in between

each 60 second operation.

●

Do not operate the food chopper if

the bowl is empty.

●

Always allow hot food to cool

before processing.

●

Do not exceed the maximum

capacities stated or fill above the

500ml level marked on the bowl.

●

Do not place any part of the

chopper in the microwave.

hints

●

If the chopper labours, remove

some of the mixture and continue

processing in several batches,

otherwise you may strain the

motor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood CH257 - FDM10 in the language / languages: All languages as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood CH257 - FDM10 Manual

Product: