Manual Kenwood bm150 (page 15 of 88) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

379995

Zoom out

Zoom in

1/88

troubleshooting guide (continued)

PROBLEM POSSIBLE CAUSE SOLUTION

14. Kneader cannot

be removed.

15. Bread sticks to pan/

difficult to shake out.

16. Breadmaker not

operating/Kneader not

moving.

17. Ingredients not mixed.

18. Burning odour noted

during operation.

•You must add water to bread pan and

allow kneader to soak before it can

be removed.

• Can happen over prolonged use.

•Breadmaker not switched on

• Pan not correctly located.

• Did not start bread maker.

• Forgot to put kneader in pan.

• Ingredients spilled inside oven.

• Pan leaks.

•Exceeding capacity of bread pan.

• Follow cleaning instructions after use.

You may need to twist kneader slightly

after soaking to loosen.

• Lightly wipe the inside of bread pan

with vegetable oil.

• Refer to “Service and customer care”

section.

• Check on/off switch ቤ is in the ON position.

• Check the pan is locked in place.

• Always make sure kneader is on shaft

in bottom of pan before adding

ingredients.

• Be careful not to spill ingredients when

adding to pan. Ingredients can burn on

heating unit and cause smoke.

• See “Service and Customer care”

section.

• Do not use more ingredients than

recommended in recipe and always

measure ingredients accurately.

PAN PROBLEMS

MACHINE MECHANICS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood bm150 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood bm150 Manual

Product: