630874

Kenwood BLM61 Blend-X Classic Manual

6
Zoom out
Zoom in
Previous page
1/236
Next page
key
filler cap
lid
vents
goblet
sealing ring
blade unit
blade base
power unit
Power On indicator
speed + pulse control
TYPE BLM61 & BLP61 only
Programme buttons
drinks
ice crush
rinse
Multi mill (if supplied)
multi mill jar
grinding mill (if supplied)
mill lid
grinding mill blade assembly
grating mill (if supplied)
mill lid
grating mill blade assembly
to use your blender
1 Fit the sealing ring into the
blade unit - ensuring the seal is
located correctly in the grooved
area.
G
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Clip the blade unit into the base
.
3 Screw the blade assembly onto
the goblet – ensuring the blade
assembly is fully tightened .
Refer to the graphics on the
underside of the blade unit as
follows:
- unlocked position
- locked position
4 Put your ingredients into the
goblet.
5 Fit the filler cap to the lid and push
down to secure.
6 Fit the lid by pushing down until
secure.
7
Place the blender onto the power
unit .
G
T
he appliance will not work
i
f the blender is incorrectly
fitted.
8
Plug in and the indicator light will
r
emain unlit whilst in the “O” OFF
position.
T
YPE BLM60 & BLP60 - Turn
t
he speed control to select a
speed (refer to the recommended
usage chart).
G
Select a speed between ‘Min’ to
‘Max’ by turning the speed control.
At the end of blending return the
speed control to “O” OFF before
removing the blender.
G
Do not remove the goblet until the
blades have stopped rotating and
the speed control is in the “O” OFF
position.
G
(P) Pulse – operates the motor in a
start/stop action. The pulse will
operate for as long as it is held in
position.
Note: If the blender is removed
from the power unit whilst a speed
is selected the Indicator light will
go out and the blender will stop.
The blender willl restart
immediately if refitted.
TYPE BLM61 & BLP61 only -
Turn to the “on” position and the
Power On indicator and the 3
pre-programmed buttons will light
up.
Note: In the “on” position the
Power On indicator will flash if the
goblet is not fitted to the power
unit.
In the “O” OFF position all the
indicator lights will remain off.
9 Select a speed (refer to the
recommended usage chart).
Choose one of the following
options:
6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood BLM61 Blend-X Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood BLM61 Blend-X Classic in the language / languages: All languages as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info