Manual Kenwood AT340 (page 9 of 70) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

463541

Zoom out

Zoom in

1/70

assembly and use

1 Remove the high speed outlet cover

ᕡ.

2 Fit the gearbox assembly onto the

mixer ᕢ.

3 Push the desired cutting plate onto

the shaft ᕣ. Each plate is numbered

for identification and the number

should be uppermost when the

plate is pushed onto the shaft.

4 Fit the sweeper onto the shaft ᕤ,

with the flat surface of the sweeper

against the plate.

●

For best results when using the

slicing/chipping plates, the sweeper

arm should be positioned opposite

the blade, as shown below.

5 Attach the lid assembly to the body,

line up the symbol on the lid

with on the body. Then turn to

symbol to lock into place ᕥ.

6 Fit the assembled attachment onto

the gearbox and turn to lock into

position ᕦ.

7 If required fit the extension chute

into the food outlet and push firmly

into place ᕧ. The extension chute

MUST be fitted when the

attachment is used with mixer

KM070 but can also be used with all

other mixers to direct the food into

the collecting bowl.

8 Connect the mixer to the power

supply and place a bowl under the

food outlet.

9 Choose which feed tube you want

to use. The pusher contains a

smaller feed tube for processing

individual items or thin ingredients.

To use the small feed tube -

first put the larger pusher inside the

feed tube ᕨ.

To use the larger feed tube -

use both pushers together ᕩ.

10 Put the food inside the feed tube.

11 Switch the mixer onto speed 3 and

at the same time push down evenly

with the pusher – never put your

fingers in the feed tube.

●

At the completion of the processing

operation, raising and lowering the

pusher several times may help to

reduce the amount of food left on

the cutting plate.

12 Switch off and unplug.

hints

●

Always use fresh ingredients

●

Don’t cut food up too small. Fill the

width of the large feed tube fairly

full. This prevents the food from

slipping sideways during processing.

Alternatively, use the small feed

tube.

●

When using a chipper plate, place

thin ingredients horizontally.

●

When slicing or shredding, food

placed upright comes out shorter

than food placed horizontally.

cleaning

●

Always switch off and unplug before

removing the attachment from the

kitchen machine.

●

Dismantle the attachment fully

before cleaning.

●

For easier cleaning always wash the

parts immediately after use.

●

Handle the cutting plates with care –

they are extremely sharp.

●

Never immerse the gearbox

assembly in water or allow it to get

wet.

All remaining parts can be washed

in hot soapy water, then dried

thoroughly. Take care as the cutting

plates are sharp. Alternatively wash

in the dishwasher (top rack only),

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood AT340 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood AT340 Manual

Product: