686272
9
Zoom out
Zoom in
Previous page
1/18
Next page
EN
Overheating indicator
The thermostatic temperature switch may become active during heavy welding or high
ambient temperatures. This is indicated by a yellow indicator light. The power source fan will
cool the unit and after the indicator goes o, the unit is again ready for welding.
Local and remote control
The welding machine can be controlled with a remote control device. Select remote control
by pressing the Remote control ON/OFF button.
Details of available remote current control devices can be found in the Ordering codes section
later in this manual.
3. USE
NOTE! Welding fumes may be dangerous to your health. Ensure that there is ample ventilation
during welding! Never look at the arc without a face shield specically designed for arc welding!
Protect yourself and your surrounding area from the arc and hot welding spatter!
3.1 Prepare to weld
NOTE! Always wear protective clothing, gloves, face and eye shields suitable for welding. It is
recommended that you make practice welds before you commence welding your main work
piece. If when igniting the arc or during welding, the electrode sticks or freezes to the work piece,
note that it will quickly heat up, and may start to glow red hot. To release the electrode, twist the
electrode holder away from the work piece and start again. If this fails, switch o the machine at
the main switch and then release the electrode after it has cooled down. Note: the electrode and
work piece will be very hot.
You can start welding after you have made the necessary preparation described throughout
these instructions.
In addition to the welding machine, welding outcome is inuenced by the work piece type,
welding position and the welding environment. Therefore, recommendations in this manual
must be followed.
During welding, an electric current is owing through the cable, clamp and electrode to the
workpiece.
The earth return cable attached to the workpiece guides the current back to the machine,
forming the closed welding circuit. Unrestricted current ow is only possible when the earth
return clamp is properly attached to the workpiece and the xing point of the clamp is clean,
free from paint and rust.
© Kemppi Oy / 1438
7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kemppi Minarc Evo 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kemppi Minarc Evo 180 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kemppi Minarc Evo 180

Kemppi Minarc Evo 180 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info